RGBW Dimmable Bulb, WiFi Control, 2.4G Remote (ESF800053)

Color: RGB W 3000K,
Flux: (warm white: 6000K): 600 Lm,
Beam: 15 bright patches of 2835 LEDs and 4 patches of 5050RGB LEDs,
Beam Angle: 140° ,
Size: 70*127mm,

Input Voltage: 100-240VAC,
Power: 8.0W,
Temperature Range: 0-35,
IP Class: IP40,


Packing Specifications:
ESF800053 1 LED bulb
ESF800053F 1 remote and 4 bulbs





LED SOURCE LIFE
LED Bulb Light Series
LED lumen depreciation is affected by numerous environmental conditions such as ambient
Temperature, humidity and ventilation. Lumen depreciation is also affected by means of control,
Thermal management, current levels, and a host of other electrical design consideration. Our
Fixtures are expertly engineered to optimize LED life when used under normal operating
Conditions. Lumen depreciation information based on LED manufacturers' source life data as
Well as other third party testing. Low temperatures and controlled effects have a beneficial effect
On lumen depreciation. Depending on usage and system installation environment, the overall
System life will be very different. Temperature and effects will affect lifetime. Product source life
Is defined as the time from the light is on to the 70% of original light output. When lights are
Working under normal temperature, no matter warm light and cold light, the LED lifetime is from
40, 000 hours to 100, 000 hours, which is the testing data of manufacture.



ESF800053 LED bulb uses super bright LED as its luminous body and high thermal plastic and
Aluminum as the radiator, which make the product performance more prominent.

30, 000 hours average lifetime

30, 000 hours average lifetime

Available in daylight or warm white

ESF800053 is widely used in hotels, restaurants, commercial and home lighting places




Remote control button functions:

1. Match code and grouping:

The remote control can be used after the remote match the code with the led bulb light, the method is as following: Choose the
Lights that you want to divide the group, then turn off the power for 10 seconds, then turn on the power switch, at the same
Time when you turn on the power (in 3 seconds), press the button "Group ON" of the group you want, the lights will flick for 3
Times, then this group is set successfully. The other groups can also be settled by the same method. Remark: One led bulb
Light can only match one group of the same remote, but one remote group can match countless led bulb lights, and one led
Bulb lights can match 10 remote.


2. Clear the code and regroup:

If the room layout are changed, or you want to make a little adjustment upon your fond, then you may want to change the
Previous groups, before you change the groups, you need to clear the code, the method is as following: Choose the lights you
Want to clear the code, turn off the power for 10 seconds, then turn on the power again, at the same time when you turn on
The power(in 3 seconds) of led bulb, press the button "All ON" for 5 times, the lights will flick for 6 times.




3. Button Functions:

ALL ON/ALL OFF: Press the button to turn on or turn off the lights which be matched to this remote. Brightness+/Brightness-: A
Warm White Adjust: Adjust the Color temp. To warm white.
Coll White Adjust: Adjust the color temp. To cool white.
Group ON/Group OFF: Press the button to turn on or turn off the lights which be matched to this group.



4. Color Ring:

In any mode, you can touch the color ring for color adjustment.