Dimmable LED Bulbs

Euchips Color Temp. Adjustable LED Bulbs:

30, 000 hours average lifetime less maintenance.
No mercury.
Available in neutral and warm white
Can dimming the color temperature
SPECIFICATIONS
COLOR TEMP.: ESF60560D (warm/daylight white): 3000-6000k (typ. )
LUMINOUS FLUX: 525 lmSOURCE
24 super bright 5630 SMD LEDs
BEAM ANGLE: 140°
HOUSING: Die Cast Aluminum in Silver
DIMENSION: 60*120mm
LISTINGS: CE
INPUT VOLTAGE: 100-240VAC
POWER CONSUMPTION: 7.2W
TEMPERATURE RANGE0-35° C
PROTECTION RATINGIP40
Conforming to international standard. Absolutely safe and stable.

1. Match code and grouping:

The remote control can be used after the remote match the code with the controller, the method is asfollowing:
Connect the power of the controller and the LED lights, choose the lights that you want to divide the group, then turn off the power for10 seconds, then turn on the power switch, at the same time when you turn on the power (in 3 seconds), press the button "on" of thegroup you want, the lights will flick for three times, then this group is set successfully.
The other groups can also be setted by the same method.
Remark: One controller can only match one remote, but one remote can match countless controller, and one remote controller canmatch only four groups at the same time.
2. Clear the code and regroup:

If the room layout are changed, or you want to make a little adjustment upon your fond, then you maywant to change the previousd groups, before you change the groups, you need to clear the code, the method is as folling:
Choose the lights you want to clear the code, cut off the power for 10 seconds, then turn on the power agagi, at the same time whenyou cut off the power(in 3 seconds), press the main button "on", or the other group button "on" for 5 times, the lights will filick for 6times very quickly, then the code is cleared successfuly. After the code is cleared, the method of setting the group is totally the same as the the principle of "matching the code and grouping"