Dimmable LED Light Bulbs E27 (ESF64560D)

SPECIFICATIONS


COLOR TEMP. ESF62560D (warm/Cool wh ite): 3000-6500k (typ. )
LUMINOUS FLUX ESF62560D (warm/Cool white): 510 lm/560lm
SOURCE 24 super bright 5630 SMD LEDs
BEAM ANGLE 140°
HOUSING Silv er co ld forging h igh Aluminum radiator
DIMENSION 60*110mm
LISTINGS CE


ELECTRCAL SPECIFICATIONS

INPUT VOLTAGE 85-265VAC
POWER CONSUMPTION7W

ENVIRONMENTAL SPECIFICATIONS

TEMPERATURE RANGE0-35
PROTECTION RATING IP40


Dimmable LED Light Bulbs E27

Remote control button functions

1. Match code and grouping: The remote control can be used after the remote match the code with the controller, the method is as following:
Connect the power of the controller and the led lights, choose the lights that you want to divide the group, then turn off the power for 10 seconds,
Then turn on the power switch, at the same time when you turn on the power (in 3 seconds), press the button "brightness+", the lights will flick for
Three times, then this group is set successfully.

2. Clear the code: If the room layout are changed, or you want to make a little adjustment upon your fond, you need to clear the code, the method Is as folling:

Choose the lights you want to clear the code, cut off the power for 10 seconds, then turn on the power agagin, at the same time when you cut off
The power(in 3 seconds), press the button "brightness+" for 6 times, the lights will flick for 6 times very quickly, then the code is cleared Successfuly.

After the code is cleared, the method of setting the group is totally the same as the the principle of "matching the code and grouping"

Button Specification: .

ON/OFF: POWER ON/OFF
Dynamic mode: 10 modes can be selected. Back to first mode after long press 3seconds
Daylight mode: Single color dimming after pressing this button
Brightness+: Brightness up after pressing this button, 8 dimming level
Brightness-: Brightness down after pressing this button, 8 dimming level
Color ring: RGB changing after touching
The controller should not put in the area with large-scale metal or near strong electromagnetic wave region, otherwise the communication Distance will be seriously affected