RGB LED Bulb Dimmable (ESF61660F)

RGB LED Bulb Dimmable


ELECTRCAL SPECIFICATIONS

INPUT VOLTAGE 85-265VAC
POWER CONSUMPTION7W
ENVIRONMENTAL SPECIFICATIONS
TEMPERATURE RANGE0-35
PROTECTION RATING IP40


LED SOURCE LIFE

Ambient temprature, humidity and ventilation. Lumen depreciation is also affected by
Can dimming the color temperature
Gn consideration. EUC-HIPS fixture are expertly engineered to optimize LED life when used
Undr normal operating conditions. Lumen depreciation information based on LED
Manufactures' source life data as well as other third party testing. Low temperatures and
LED Bulb Light Series
ESF60660F-N1-00
Could vary substantially based on us-age and the environment in which the system is
Installed. Temperature and effects will affect lifetime. EUCHIPS rates product lifetime using
Lumen depreciation to 70% of original light outp-ut. When the fixture is runing at room
LED lumen depreciation is affected by numerous environmental conditions such as
Means of contral, thermal management, current levels, and a host of other electrical desicontrolled
Effects have a beneficia effect on lumen depreciation. Overall system lifetime
Temperature using, the range of lifetimeis in the range of 40, 000-100, 000 hours. This is
LED manufactures' test data.


Remote control button functions

1. Match code and grouping: The remote control can be used after the remote match the code with the controller, the method is as following:
Connect the power of the controller and the led lights, choose the lights that you want to divide the group, then turn off the power for 10 seconds,
Then turn on the power switch, at the same time when you turn on the power (in 3 seconds), press the button "brightness+", the lights will flick for
Three times, then this group is set successfully.

2. Clear the code: If the room layout are changed, or you want to make a little adjustment upon your fond, you need to clear the code, the method
Is as folling:
Choose the lights you want to clear the code, cut off the power for 10 seconds, then turn on the power agagin, at the same time when you cut off
The power(in 3 seconds), press the button "brightness+" for 6 times, the lights will flick for 6 times very quickly, then the code is cleared
Successfuly.
After the code is cleared, the method of setting the group is totally the same as the the principle of "matching the code and grouping"

Button Specification: .

ON/OFF: POWER ON/OFF
Dynamic mode: 10 modes can be selected. Back to first mode after long press 3seconds
Daylight mode: Single color dimming after pressing this button
Brightness+: Brightness up after pressing this button, 8 dimming level
Brightness-: Brightness down after pressing this button, 8 dimming level
Color ring: RGB changing after touching
The controller should not put in the area with large-scale metal or near strong electromagnetic wave region, otherwise the communication
Distance will be seriously affected