Sign In Join Free
1 / 4
sanji popular dc power jack
| Model No. : | DC-004D DC POWER JACK |
|---|---|
| Brand Name : | SJ |
Product description
| Mechanical characteristics | ||
| Item | Conditions | Specification |
1 | Insertion force | Measurement shall be made after insertion and withdrawal using standard plug gauge 3 times. | 2.9429.4N0.33kgf |
2 | Withdrawal force | Measurement shall be made after insertion and withdrawal using standard plug gauge 3 times. | |
| Electrical characteristics | ||
| Item | Conditions | Specification |
1 | Rating | DC 12V,1A | |
2 | Contact resistance | 1K Hz Measured at small current (1A or less) | 30 mΩ or less |
3 | Insulation resistance | A voltage of 500V DC shall be applied for a minute. Between conductors which should not make contact under normal conditions after which measurement shall be made. | 100MΩ MIN. |
4 | Dielectric strength | Between conductors which should not make contact under normal conditions. 500V AC 50 to 60Hzfor 1 min.(trip current 2mA) | Without distinct damage. |
| Endurance characteristics | ||
| Item | Conditions | Specification |
1 |
Solderability | The terminals shall be dipped into soldering flux, and shall be immersed into molten solder of 230°C±5°C for a period 3±0.5 seconds. | A new uniform coating of solder shall cover a minimum of 75% of the surface being immersed. |
2 | Resistance to soldering heat | Solder temperature350±10 Immersion depth2±0.5mm Immersion time3±0.5 seconds By a soldering iron to have a capacity of 60 watts. | Electrical and mechanical characteristics shall be satisfied. |
3 | Cold | The jack shall be stored at a temperature of -40°C±2°C for 96 hours. And then it shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be made. | Electrical and mechanical characteristics shall be satisfied. There shall be not show remarkable failure. |
4 | Dry heat | The jack shall be stored at a temperature of 70°C±2°C for 96 hours. And then it shall be subjected to the controlled recovery conditions for 0.5 hours after which measurement shall be made. | |
5 | Humidity | The Pin Jack shall be subject to 90~95%RH, 40±2 for 96 hours, and shall then be conditioned at room ambient conditions for a period of 30 minutes. | Electrical and mechanical characteristics shall be satisfied. Insulation resistance30MΩ MIN. Contact resistance50mΩ MAX. |
6 | Life test | Insertion and withdrawal shall be made with the mating plugs and jacks for 5000 cycles at a speed of 10~30 cycles/min. |
Insertion force29.4N MAX3Kgf Withdrawal force1.9629.4N 0.23kgf
Contact resistance Between plug and contact100 mW MAX. Each closed contact60 mW MAX.
|
| Product Picture | ||
| Product Dimension Drawing |
Packaging 
Company Information 
FAQ 
Q: Can I get some samples? A: Yes, sample order is available for quality check and market test, and it will be freight collect payment. Q:?What’s the delivery time? A: It usually takes about 15-20 days to produce the products. Q: What’s your payment term? A: We usually accept T/T as the main payment term, and other payment can also be negotiated. Q: Can I mix different models in one container? A: Yes, different models can be mixed up in one full container. Q: Do you have the products in stock? A: No, all products will be newly produced according to your order including samples. | How to contact us ? |
Send your inquiry to this supplier
Product Alert
Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.
Your use of this website constitutes acknowledgement and acceptance of our Terms & Conditions.
Copyright © 2009-2024 Bossgoo Co., Ltd. All rights reserved.
