Plastic auto parts production machine

plastic auto parts production machine 

Ningbo Machinery Industry Co., Ltd. a wholly owned subsidiary company of Chenglu Group, devoted itself to creating the [Swift-horse" in the plastic industry. With almost 20 years` development, Bole Machinery has grown-up into a global well-known injection molding machine brand with independent R&D ability. There are 30 series, more than 100 models products, like EKII series central locking toggle precision injection molding machines with the clamping force from 70 Ton to 4000 Ton, DK series electric-hydraulic two-platen injection molding machines, CIML series carbon-fiber product injection molding machines, EKII/J series pipe fitting special machines with large injection volume, custom-made machines for special technical materials etc. Bole Machinery has been involved in the scientific research projects, such as [National Important Torch Program" and [National Important New Product Project" and designates [National High-Tech Enterprise" by the Chinese Ministry of Science and Technology. It has been listed into [China Injection Molding Machine Special Industry Base" (one of the three important enterprises won this honor in Chinese Injection Molding Machine Industry). [Bole" brand was awarded [Zhejiang Province Well-known Brand", [Zhejiang Province Famous Brand Product".

1. Product Instructions

Bole centre clamping structure

■ 100% clamping force use, 10%-20% higher than traditional toggle structure.

■ Less possibility of flash, save flash trim work.
■ Save 2-5% material.
■ Offer good protection to mould, platens and tie bars.
■ Opening stroke 10-20% longer.

 Traditional structure
■ With heavy clamping force waste, only 80-85% efficiency.
■  Moving platen with obvious deformation, cause flashes, waste of material and labor of trim the flashes.

EKH系列技术参数表		UNIT	BL700EKH/C5800
国际标准规格	International specification		5800
螺杆直径	Screw diameter	Screw specifications	A	B	C
		mm	85	95	105
螺杆长径比	Screw L/D ratio		23	21	19
理论注射容积	Theoretical injection capacity	cm3	2836	3542	4327
注射量 (以PS计)	Shot weight(PS)	g	2609	3259	3981
		oz	92.2	115.2	140.7
最大对空注射速率	Injection rate into Air	cm^3/s	708	884	1080
最大对空注射速率		g/S	644	805	983
注射压力	Injection pressure	MPa	206	165	135
理论塑化速度	Theoretical plasticizing speed	g/S (PS)	92	132	177
注射行程	Injection stroke	mm	500
最大注射速度	Max. injection speed	mm/s	125
最大螺杆转速	Screw speed	r/min	150
系统压力	Sys. Pressure	MPa	17.5
电机总功率	Pump Motor(Min～Max)	kW	77.6～81.8
电机数量	number of Motors	PCS	2
预塑电机功率      （1850-4000吨标配)	Pre-plastic motor power		Optional
电热功率	Heater power	kW	43
温控区数	Number of temp. control zones		5+1
锁模力	Clamping force	kN	7000
开模行程	Opening stroke	mm	970
拉杆内间距	Space between tie bar	mm x mm	955×855
最小模具厚度(T型槽)	Min. mould height	mm	400
最大模具厚度(T型槽)	Max. mould height	mm	960
最大模板距离(T型槽)	Max. Daylight	mm	1930
顶出行程	Ejector stroke	mm	260
顶出力	Ejector force forward	kN	166
顶针回缩力	Ejector force back	kN	117
顶出杆数	Number of ejector bar	PC	21
干循环时间	Dry Cycle Time	S	3.8
能耗（注1）	Energy consumption level	kW.h/kg	≤0.4（1级）
料斗容积	Hopper capacity	kg	100
油箱容量	Oil tank capacity	L	900
机械外形尺寸(约)	Machine dimensions(L×W×H)	m x m x m	9.6x2.3x3
机器重量(约）	Machine weight	Ton	25

2. Bole Competitive Philosophy

Leading technology and performance

China unique producer, central locking toggle

CIML carbon-fiber products intelligent moulding line, made for lightweight of automobile

The performance of Electro- hydraulic hybrid two platen machine has reached the leading level

3. Clients Cases

plastic auto parts production machine

4. About Bole Machinery