Specifications metal electrolytic
1/5-1/10 size and weight of SCR
high efficiency\reliability\low harmonic wave
N+1 modular custom design
Application: Widely applied in non-ferrous metal electrolysis, gold precious metal smelting, rare earth electrolysis, hard alloy, diamond smelting, salt solution, sylvine electrolytic caustic soda, fireproofing material heating, etc. Production plant pic: good cooper raw material half finished products zone
transformer and heat distractor assembling production plant
QC testing rectifier transportation
Product features: 1.Volume and weight are 1/5-1/10 controlled rectifier, respectively, it is convenient for you to carry out planning, movement, and installation.
2. 0utput voltage and current are adjustable, can select constant current and voltage, greatly increase the flexibility of customer's application.
3. Full protective functions: input power source phase lack and under-voltage protection, output over-current and over-heating protection.
4. Ripple factor less than 4%.
5. For machine constructure, the company product adopt main circuit and control loop separation, so as to reduce failure rate and extend the service life of power source.
6. Good electricity saving effect, compared with controlled silicon rectifier, save more electricity by 10%. Electric data:
Input voltage | AC380V±10% 50/60Hz |
Output range | 10%~100% of rated valuecommon voltage, current rating of |
Output current | 0-50000A |
Output voltage | 0-100V |
Control method | IGBT pulse-width-modulated control |
Rated. type of cooling | Continuous forced air or water cooling |
Rated voltage control precision | Within ±1% of rated DC voltage value |
Rated current control precision | Within ±1% rated current value |
Ripple factor | <4% |
Installation site | indoor |
Service conditions | Ambient temperature | -10~40°C |
Relative humidity | 30%~85% |
Sea level elevation | 1000m below |