Infant Baby Bath Floating Duck Temperature Thermometer

Infant Baby Bath Floating Duck Temperature Thermometer

ATTENTION:

1. When the water temperature is lower than or equal to 32.9 ºC, the yellow light flashes and the character "cold" is displayed in the lower left corner of the display screen.
When the water temperature is higher than the set value (the setting range is 38-41 ºC, the default value is 38 ºC, and the factory setting is restored after power failure), the red light       flashes and the "hot" character is displayed in the upper left corner of the display screen.
2. As long as the water temperature exceeds the set range, there will be a light alarm.
3. The replaced old batteries can not be disassembled and discarded at will. Please recycle them according to the government regulations, and pay attention to keep away from children to prevent eating by mistake.
4. Waterproof grade: IP67. Please install the battery completely according to the manual before putting it into water.
5. All settings wait for 10 seconds without any operation, and automatically jump to the temperature mode after 10 seconds.
6. Before each use, a small amount of shower gel should be used to clean the two metal sensing small contacts at the bottom, so as to prevent the intermittent jumping caused by poor induction caused by stains.
7. Must be used under adult supervision.

❤️ ❤️ Important: ❤️ ❤️

• Infant Bath Floating Toy Safety Temperature Baby Thermometer---Babies will love the products especially those are in cartoon shapes and they might like to stay in the water and play with it, please don’t worry about the waterproofing issue because our product is the waterproofing level.
• Infant Bath Floating Toy Safety Temperature Baby Thermometer---Temperature will be fluctuated due to newly added water mixture, be sure to do the temperature measurement a minute after the temperature stabilized. You can also use a towel or by hands to mixed the water evenly to speed up the process.
• Infant Bath Floating Toy Safety Temperature Baby Thermometer---Parents must be cautious about water temperature as will as environment conditions when bathing your infants in order to keep them safe and healthy. Make sure the baby bath water temperature for a baby bath is between 97.7˚F to 100.4˚F and baby room temperature is at least 71.6˚F.

Product Description:

Item name	Floating Bath Toy Bathtub Baby Bath Thermometer
Item number	WMC1803
Temperature range	0~60℃/32℉-140℉
Resolution	0.1℃/0.18℉
Accuracy	+/-1C
Battery	2* LR44 / AG13
Certification	CE certificated
Packaging	Color box,blister card or according to requirement

FUNCTION:

1. It can measure the water temperature of bathtub. When the water temperature is too high or too low, the light will flash and alarm.
---When the water temperature is too high, there is a red backlight flashing prompt and the "hot" character is displayed in the upper left corner of the display screen. (you can set the high temperature prompt temperature point by yourself)
---When the water temperature is too low, there is a yellow backlight flashing prompt and the character "cold" is displayed in the lower left corner of the display screen.
---When suitable water temperature range, there is green backlight display and current water temperature.
2. The unit of C/F can be easily switched.
3. Power off or replace the battery to automatically restore the factory settings.
4. Waterproof design of the whole machine.
5. It can be used as a water toy for baby during bathing.


ATTENTION:

1. When the water temperature is lower than or equal to 32.9 ºC, the yellow light flashes and the character "cold" is displayed in the lower left corner of the display screen.
When the water temperature is higher than the set value (the setting range is 38-41 ºC, the default value is 38 ºC, and the factory setting is restored after power failure), the red light       flashes and the "hot" character is displayed in the upper left corner of the display screen.
2. As long as the water temperature exceeds the set range, there will be a light alarm.
3. The replaced old batteries can not be disassembled and discarded at will. Please recycle them according to the government regulations, and pay attention to keep away from children to prevent eating by mistake.
4. Waterproof grade: IP67. Please install the battery completely according to the manual before putting it into water.
5. All settings wait for 10 seconds without any operation, and automatically jump to the temperature mode after 10 seconds.
6. Before each use, a small amount of shower gel should be used to clean the two metal sensing small contacts at the bottom, so as to prevent the intermittent jumping caused by poor induction caused by stains.
7. Must be used under adult supervision.