1 / 5
Model No. : | Star |
---|---|
Brand Name : | wenmeice |
species : | Other Baby Toys |
Product description
Floating Bath Toy Bathtub Baby Bath Thermometer
0~60℃/32℉-140℉
0.1℃/0.18℉
Item name
Floating Bath Toy Bathtub Baby Bath Thermometer
Item number
WMC1803
Temperature range
Resolution
Accuracy
+/-1C
Battery
2* LR44 / AG13
Certification
CE certificated
Packaging
Color box,blister card or according to requirement
FUNCTION:
1. It can measure the water temperature of bathtub. When the water temperature is too high or too low, the light will flash and alarm.
---When the water temperature is too high, there is a red backlight flashing prompt and the "hot" character is displayed in the upper left corner of the display screen. (you can set the high temperature prompt temperature point by yourself)
---When the water temperature is too low, there is a yellow backlight flashing prompt and the character "cold" is displayed in the lower left corner of the display screen.
---When suitable water temperature range, there is green backlight display and current water temperature.
2. The unit of C/F can be easily switched.
3. Power off or replace the battery to automatically restore the factory settings.
4. Waterproof design of the whole machine.
5. It can be used as a water toy for baby during bathing.
ATTENTION:
1. When the water temperature is lower than or equal to 32.9 ºC, the yellow light flashes and the character "cold" is displayed in the lower left corner of the display screen.
When the water temperature is higher than the set value (the setting range is 38-41 ºC, the default value is 38 ºC, and the factory setting is restored after power failure), the red light flashes and the "hot" character is displayed in the upper left corner of the display screen.
2. As long as the water temperature exceeds the set range, there will be a light alarm.
3. The replaced old batteries can not be disassembled and discarded at will. Please recycle them according to the government regulations, and pay attention to keep away from children to prevent eating by mistake.
4. Waterproof grade: IP67. Please install the battery completely according to the manual before putting it into water.
5. All settings wait for 10 seconds without any operation, and automatically jump to the temperature mode after 10 seconds.
6. Before each use, a small amount of shower gel should be used to clean the two metal sensing small contacts at the bottom, so as to prevent the intermittent jumping caused by poor induction caused by stains.
7. Must be used under adult supervision.
Send your inquiry to this supplier