Anti-Scratch Thermal Laminating Film

Specifications

*Anti-scratch Thermal Laminating Film
*Good for UV inks
*Designed for High Quality Graphic Media
*Enhance the image vision

Anti-scratch Thermal Laminating Film is one of the laminating films we are producing.
As the name calls, it is scratch resistant as a consequence of special chemical treatment onto the base film of BOPP.
This film is extrusion-coated with EVA by one side, giving support to be laminated through heat.
Anti-scratch Thermal Laminating Film is especially designed for high quality media, presenting a semi-matte surface on one side that gives the film a pleasant touch and enhance the image of laminated products.
Anti-scratch Thermal Laminating Film is seen as luxury packaging material for cosmetic, technology any other type of post-lamination enhancement.

Scratch resistant
Comfortable touch
Good for UV inks and hot stamping
Designed for high quality graphic media
For luxury packaging
Enhance outstanding effect, distinguished from other prints.
Anti-scratch Thermal Laminating Film is widely used in the custom packing industry as well as for high-end book covers, packing prototypes, corporate brochures, product branding as well as a variety of other quality graphic solutions.
It is also well applied to digitally printed media.


Guide on operation
1. Better to be used by dry/heat laminator
2. Adjust roller pressure and temperature according to different types of paper and ink.
3. When using the film for the first time or changing the usual size, a small trial volume before starting massive lamination is proposed.
4. Normal process temperature is 90C-105C (203F - 221F), roller pressure and temperature vary from different types of paper, ink and machines.
5. Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture or powder.
6. Make sure to put the material in place with low temperature and dry.
7. The following situation will affect the final quality of the film during lamination.
A. Using metal ink
B. Ink containing too much wax, dried oil, adhesive, silicon additive and so on.
C. Much too thick ink
D. Ink completely undried yet.
E. Much too humid paper sheet
F. Too much powder on the surface

Packaging & Shipping 

*One Roll Metalized Thermal Laminating Film, One carton 
*Tens of rolls in a pallet 
*10 to 12 pallets loaded into 1*20FCL (appro. 13MTs) 
*Or 20 to 22 pallets loaded into a 40 feet container (appro. 25MTs) 
*Seaport: Xiamen, Shanghai, Ningbo 


Our Service 
In order to guarantee high product quality, we carry out very strict management principle all the times. 
Every detail of processing is well controlled with special attention. 
In case of a bad roll found, we will make compensation as responsibility. 



Company Info 
At present we hold two producing lines, serving 350MTs/month. 
We serve 20 days delivery of a 40 feet container. 
From raw materials purchasing to after-sale service, we carry out very strict management principle so as to guarantee high product quality served. 




FAQ 
About Samples 
* Samples for testing are available and free 
* Usually sized 400mm*100m/200m of each glossy or matt roll 
* For favorite measures, please feel free to advise 
* The freight for sample delivery is at receiver's side 
* But to be refunded by deducting from the right coming order automatically 
* For saving the cost, we recommend the way of prepaid instead of collect 


About Capacity 
* 2 coating lines 
* 20 days delivery of a 40 feet container 
* 350MTs (kilograms) per month 
* Thickness from 15micron (10BOPP+5EVA) to 32micron (18BOPP+14EVA) 
* Roll width from 180mm to 1680mm 
* Roll length from 2000m to 6000m 
* Reel inner diameter at 25.4mm (1 inch) or 76mm (3 inch) 
* Reel Outer Diameter: 240mm to 380mm (upon reel length and width)
 
You may also be interested at our following products: 
Holographic Thermal Laminating Film 
Metalized Thermal Laminating Film 
Soft Touch 
3D Thermal Laminating Film 
Nylon Thermal Laminating Film 
Anti-scratch Thermal Laminating Film 
PET Thermal Laminating Film (Pouch or Roll) 
Double-side-glued Laminating Film 
Hot Stamping Foil 



Contact Us
 
Xiamen Best Resource Foreign Trade Co., Ltd.

Address:Room 2601 of Building D4, Wanda Plaza, Huli District, Xiamen, Fujian, China
WhatsApp/ Viber/ Line/ WeChat: +86-18950129371
Fax: +86-592-5503590
Email: joyce.guo@after-printing.com