Wire Cutting EDM (DK77140, HF)

Control cabinet function description
No. DescriptionRemarks
1 control integration software
2 graphic trace
3 arbitrary Angle rotation
4 symmetric processing
5 broken wire protection
6 end of the program to turn it off
7 u disk read and write functions
8 five axis control, four axis linkage, dividing head straight to find are special-shaped parts, translational cutting.
9 short circuit automatically rolled back
10 forward and reverse processing
11 simulating processing
12 power-off protection
13 can send the AUTOCAD DXF format and ISOG format for data transformation
14 molybdenum wire offset compensation

Key components description

NamePlace of productionRemarks
Control system
Make control integrationChongqing HUAMING
Mechanical part
CastingDomesticHT200resin sand
Ball screw pairdomestic: Nanjing process equipmentP3 class
Guide raildomestic: Taiwan SHANGYINquenching
Pin rollerdomestic: Shanghai DANLI
Bearingsdomestic: HarbinP5 class
Japan: NSK
Electrical part
A. C. ContactorSIEMENS
RelayOMRON
High frequency power tubeJapan imported
TransformerWUXI
Step motor CHANGZHOU BAOMA
Other Japan, Taiwan, Joint Venture

Accessories

Standard accessories
1 work light
2 simple jig
3 vertical corrector wire electrode
4 crank
5 tight wire device
6 tool carrier
7 working fluid system
8 workbench water retaining cover

Delivery attached documentation

1 packing list
2 factory inspection report
3 system operation manual 3copies
4 machine operation instruction 3copies

After-sales service description
1). The equipment from the date of delivery, the supplier is responsible for the machine one year warranty, guarantee system for two years, in the equipment under normal use, the supplier is responsible for the maintenance free replacement spare parts. But wearing parts, consumables, tools don't belong to the category of the warranty.
2). More than one year after the warranty period, the supplier is responsible for providing maintenance required spare parts, and provides a reasonable charge for maintenance services.

Training
The supplier is responsible for 1-2 technical personnel to the buyer for 1 to 2 days of on-site operation training free of charge.
No. ItemTraining content
1programmingguide the programming
2operation
Machine tool structure, boot steps, operation panel button function introduction
Processing program called, operating explanation
Machine tool operation matters needing attention
3maintenance of machine
1). Mechanical structure introduction
X, Y, Z, U, V axis structure introduction
Hydraulic and lubrication system structure introduction
2). Common mechanical faults and maintenance
Broken wire processing
4electrical maintenance
1). Common electrical components and conforms introduction
2). Machine tool electrical control diagram
3). Common electrical troubleshooting
5testoperational testing