Wing Gatesturnstile Cpw-331dds

Wing GatesTurnstile CPW-331DDS New Design

Size: 1400*300*990mm

Product Descriptons:
Wing Gate Turnstile developed by CMOLO operates quite swiftly and safely, it is very suitable for wide lane.
The machine organically integrates machinery, electronics, microprocessor control and a variety of identification technologies, conveniently compatible with access control system, barcode cards, biology identification equipment.
The machine provides a high level of security and high capacity by adopting reliable security protection devices, alarm devices, direction indicators etc.

Function Specifications:
Both directions can be set as controlled mode or free mode.
NO mode & NC mode can be switched over by users easily & freely.
Self-recovery function: The machine will recovery automatically with invalid counting if passage is not completed within pre-set time (5 seconds default, adjustable by software).
Self-examine Function: It is convenient for users to maintain and use.
Tailgating-detection function.
Intruding-alarm function.
Anti-pinch function: Protection against finger entrapment and personal injury.
Emergency-escape function: The obstacles will open automatically by pressing the emergency button which can be remote-controlled whether the power is on or not.
With interface of relay switch (the dry contact signal or +12V electrical level signal or DC12V pulse signal of pulse width ≥ 100ms, driving current ≥ 10mA), compatible with all kinds of access controllers.
Each machine can be set by Physical Address (Optional).
Equipped with free control software for man-machine interface & control command SDK.

Framework Specifications:
Framework: 304 (Standard) / 316 grade stainless steel
Thickness of Ply: 1.5mm (Standard) / 2.0mm
Finishing: Brushed surface (Standard) / Polishing surface
Material of Obstacles: Stainless steel (Default) / Organic glass (Optional) / Tempered glass (Optional)
Passage Width: 520mm (Default) / 900mm (Max)

Electric Specifications:
Power Voltage: AC220V / AC85~230V
Operation Voltage: DC24V
Operation Current: 3A / 5A (Max)
Driving Motor: Brushless DC motor
Communication Interface: RS485 (1CH) / RS232 (3CH); Available to CAN BUS and Ethernet (Optional)
Control I/O: Relay Out (6CH) / Level Input (4CH)
Transit Speed: 45~60 passage / minute
Temperature: -20~60 Degrees

Technical Parameters
power and voltage	AC 220V / AC 85 ~ 230V	operation voltage	DC 24V
machinery mechanism	MTHT™  Lossless mechanism	driving motor	DC brushless motor
communication interface	RS485 / RS232	rated power	90W
passing speed	30 ~ 45 people / min	working environment	Indoors
operation temperature	- 15 ~ 60Centigrade	humidity temperature	0 ~ 95% (non-condensation)
control input/output	6 channels relay control output/ 4-channel dry contact signal input