wind turbine controller

  Product Description  2KW  wind turbine controller (MAX/XG serise) Our controller built-in corresponding free solar moudle. 2kw built-in 600w solar moudle.   Functions INTRODUCTION: The wind/solar hybrid controller is control device which can control wind turbine and solar panel at the same time and transform wind and solar energy into electricity then store to the battery bank. Wind/solar hybrid controller is the most important part in off-grid system, whose performance has much effect on life expectancy and operation of the whole system, especially the battery expectancy. Life span of battery will be shortened by over charge or over discharge in any case.     OPTIONAL FUNCTIONS: ²  Temperature compensation function. ²  RS communication function: RS232/RS485/RJ45/GPRS are optional communication ports.   OPTIONAL ACCESSORIES: Ethernet communication module CNS311 is a terminal device using the Ethernet data transmission. Embedded Ethernet serial converter module integrated within the TCP / IP protocol, complete the networking of device easily, fast access to the LAN and the Internet. The module is transparent to user, who does not need to know well the complex network and TCP / IP protocol.   GPRS communication module ZSD3110 is a terminal device using the GPRS wireless data transmission. Which supports for PPP, TCP, UDP, ICMP and other complex network protocols and SOCKET standards, providing completely transparent data transmission and users free control transmission .This module supports point-to-point, point-to-multipoint, equipment-to-equipment, equipment-to-center etc different communications modes . Users do not need to worry about complex network protocol, they can have the wireless data transceiver with RS232/485/422 interfaces, So that the device can be access to Internet anytime and anywhere.  

Model	WWS20A-48	WWS20A-96	WWS20A-120	WWS20A-220
Rated Wind Turbine Power	2kW
Rated Solar Power	600W
Rated Battery Voltage	48V	96V	120V	220V
Wind Turbine Maximum Input Current	80A	40A	30A	20A
Wind Turbine Maximum Input Power	4kW
Unload Voltage(factory default)	56V	112V	140V	252V
Unload Current(factory default)	50A	25A
Control Mode	PWM
Display Mode	LCD
Display Parameters	Wind Turbine Power, Wind Turbine Voltage, Wind Turbine Current, PV Voltage, PV Charge Current, PV Power, Battery Voltage
Working Temperature &Humidity	-20~+50℃/35~85%RH(Without Condensation)
Temperature Compensation(optional)	4mV/℃/2V ,–35℃--+80℃, Precision:±1℃
Communication Mode(optional)	RS232,RS485,RJ45,GPRS. Etc
Protection Function	Solar reverse charge protection , Solar reverse connection protection, Battery over charge protection ,Battery reverse connection protection, Lightning protection, Wind turbine current limiting, Wind turbine automatic brake and manual brake.
In order to serve our customers better. Our company can adjust parameters configuration according to customer’s requirement.

    Advantages   PERFORMANCE FEATURES: ²  Superior military-grade components to ensure the product stability. ²  Adopt Single Chip Micyoco (SCM) to have precise system control. ²  Perfect protection function, thus the system has higher reliability. ²  Check and set all operation parameters as requirement from LCD display. ²  Voltage limiting and current-limiting charge mode, ensures battery in the best charging status. ²  PWM stepless unload mode, which burn the excess power into dump load, making the battery charging in best status. ²  Design of high quality aluminum alloy appearance, with small size and good cooling effect. ²  European CE certification.