WCX400/3 Superfine Powder, Concentrator Mahcine,Powder Mill

  Superfine Powder, Concentrator Mahcine,Powder Mill     Introduction:
Powder Concentrator is mainly used for raw material & clinker classifying and setting up close-circuit grinding system with the tube mill. It is widely used our in cement, chemical, metallurgical and other industries.
Working Principle:
On the working status, high-speed motor drive vertical shaft to rotate through the transmission device and the materials enter into the powder concentrating chamber through the feed inlet at upper part of the power concentrator. After that, the materials will fall on the material scattering plate through the power passing pipeline set between the upper and lower cones of medium-and-coarse power collection cones, and the material scattering plate rotates with the transmission shaft. Under the inertial centrifugal force, the materials will be scattered around evenly, and in the external fans, the materials are influenced by the high-speed air flow entering into the powder concentrating chamber through air inlet. Under the inertial centrifugal force, the coarse particles in the materials are thrown to the inner wall of the power concentrating chamber and then fall along the wall on the coarse power collection cone, and other particles will be impacted up by the air flow that spun upward. When passing the action area of large fan blades, some of the coarse particles will be thrown to the inner wall of the power concentrating chamber and then fall along the wall on the coarse power collection cone. After passing the large fan blades, under the action of upward air flow, the medium and fine powder will enter into the secondary power concentrating area through the vertical guide blades. Under the action of the strong and stable plane eddy formed in the rotating cage-shape rotor, the dust-containing air flow throw the medium and fine powder to the vertical blade and loss their energy of motion, and then fall in the coarse powder collection cone, and finally be discharged through the medium and coarse pipe. The fine meeting requirements can pass the cage-shape rotor and enter into the high-efficiency low-resistance cyclone separator and then fall in the fine powder collection cone and become finished products. Features:
1.Innovative design: With new-style assembled design method, it is integrated with advantages of original centrifugal type, cyclone type and double rotor type, which greatly lower the energy consumption.
2.High efficient and low energy consumption: Materials are classified in several classifying areas, with unique distribution structure. It can make excellent powder-selection with high efficiency of over 85%. And the electrical power consumption is 30% lower than the traditional powder selector cost
3.Adjusting standard: This machine effectively improve the grain grade of final product, and enhance the cement quality to adjust to national new cement standard.
4.Condensation resistant: With available condensation resistant design, it can in seasoned with the southern's high moisture. Main technical parameters:

Model	WCX250/4	WCX400/2	WCX400/3	WCX600/3	WCX600/4
Separation size	≤2μm	≤10μm	≤10μm	≤10μm	≤10μm
Capacity(kg/h)	600-800	1000-2000	2000-3000	3000-4000	4000-5000
Air volume ( m³ /h)	3000	8000	10000	12000	18000
Rotary speed (rpm)	8000	3500	3500	3500	3500

          Welcome to Shanghsai DingBo