Waterproof IP67 SAA CE RoHS 30W LED Flood Light

Sohetek waterproof outdoor led flood lighting.

Shenzhen Sohetek Elctronic Co., Ltd. Advantages:
1. Professional manufacturer specialized in outdoor LED flood lighting

2. Already 5 years experiences in manufacturing LED drivers which is heart of LED lights

3. Partnership with bridgelux and epistar LED chips, using national standard radiator

Parameter:

1. Product model SHT-FL01-30W
2. Product name LED flood light

3. LED specification bridgelux 45mil / epistar 35mil

4. Power consumption 1*30W

5. Input voltage 100-240VAC / mw driver 90-264VAC

6. Luminous flux 8000-10000lm

7. LED efficiency80-100lm/w

8. Color temperature 3000-3500k/4000-4500k/6000-6500k

9. Certifications CE RoHS

10. Life time >50, 000 hours

11. Beam angle 120 90 60

12. IP code IP65, IP67

13. LED flood lighting


Features:

1. Adopting integrated chip as light source with high lighting efficiency, high CRI(ra>75), good quality heat dissipation, low light degradation.

2. Aluminum alloy die cast steel, good strength, high quality heat dissipation. Anti corrosion
And baking varnish surface, can be for outdoor using.

3. Make a dedicated luminous intensity distribution design via the aluminum reflector, there are two options for lighting distribution, one is for focusing, another is for divergencing.

4. Wide input voltage from 85V~265VAC, constant voltage constant current output, can start up at once

Applications:
Factory, gym, dock, billboard, building, tunnel, landscape, city lighting projects.

Safety notice for using:
1. Please always use the light out of its package.

2. Before starting use of the light, please check if the light was damaged during transportation. If
3. Any damage Shown, please do not install or use it.

4. Any maintenance should be performed by trained professionals only.

5. Keep packaging materials away from the reach of children and pets. Risks of suffocation!
Caution. The packaging contains small parts that may be swallowed by children.

6. Never leave children unattended in the vicinity of the lights and do not allow them to play with electrical devices.

7. Try to avoid looking directly in the LED beam-especially for extended periods of time. Do not shine the LED light In another person's eyes.

8. Never cover the light by other objects.

Maintenance:
Prior to cleaning the light, make sure it has been disconnected from the power supply.
Use a dry or slightly moistened cloth for cleaning.
Never use any chemicals or abrasives for cleaning.

Proposal:
Used electronic devices must be collected for recycling and can not be deposited together with daily garbage.

Installation:

1. This product should be installed by trained electricians.
Check integrality of the products when unpack the packing.

2. When laying the cables, make sure that the cables and plugs are not subjected to any tensile or twisting forces.

3. Fit the cable tension relieving mechanisms to the connection points of the surface-mounted lights. Do not kinkcables. Output cables should be laid separately and at a distance from other cables.

4. Proceed by connecting the wiring cables to the luminaries. Usually, the brown(or black) wire is the live wire, connect it with the terminal marked l. The blue wire is naughty wire, connect it with the terminal marked n.

5. Do not remove the name plate of the power supply and driver of the light.

Notes:
Nonprofessionals are not allowed to disassemble and maintain the products. We have the right not to Provide aftersale service if unauthorized disassembly and maintenance happens to the products.