Product description
Wall Ties Form Description: Materials: galvanized stainless steel wire(304 or 316),others. Diameter: 2mm--6mm,according to your requirement. Packaging: 100pcs/bundle,500pcs/case. Delivery time: 25 days. Delivery Port: Xingang Tianjin. Payment Terms: L/C, T/T, Western Union, Paypal or as your requirement. A number of key factors must be taken into consideration to conform to building regulation during installation of wall ties: Wall ties should be pressed down in, and then surrounded by, fresh mortar. To ensure cavity wall ties are effective at tying the leaves together they should be installed as the inner leaf is constructed and not simply pushed into a joint. Ties should be installed with a slight fall to the outer leaf, never towards the inner leaf as this could provide a path for moisture to cross the cavity. The drip part of the tie should point downwards and be positioned near the centre of the open cavity. Ties with multiple drips can often be positioned centrally as part of the drip will normally be near the centre of the open section of a partial fill cavity. Installed ties should be clear of mortar droppings to allow the drip to function and prevent water from crossing to the inner leaf of masonry