Vacuum Belt Drying Machine

The low-temperature continuous vacuum multilayer belt drier developed by this company is a wholly-sealed vacuum belt drying equipment that can feed and discharge materials continuously. According to the capacity required by customer, 3-11 layers of belts can be designed inside the vacuum dryer. This product is suitable for drying various sugars such as paste, maltose, cane sugar and beet sugar, and this product solves a big problem on drying of high-concentration, hygroscopic and high-viscosity Chinese medical extract.
Operating principles
Low-temperature vacuum liquid multilayer bet drier is a continuous feeding and discharging vacuum drying equipment. The raw material to be dried is feeded into drying machine through feeding pump, and is well distributed on convey belt through distributing device. The boiling temperature of materials is reduced through high vacuum, and the moisture of liquid raw material is sublimated to gas directly. The convey belt runs on the heating plate at a constant speed, and the internal heat source of heating plate can be steam, hot water or electrical heating, With the running of convey belt, the temperature is adjustable up and down according to the specific characteristics of material from evaporating and drying in the front to cooling discharging in the end. The discharging end is equipped with a specific vacuum grinding device to grind products into different granularity. The dried powder can be automatically packaged or used by the following process.
Main features
The whole set of process is in automation, channelization and continuity.
The targets of continuous feeding and discharging in vacuum condition have been reached.
The operations of drying, smashing and pelletizing can be completed in vacuum condition.
The operation cost is 1/3 of vacuum drying oven and spray drying, and 1/6 of freeze drying.
The maximum operators are only two, the human costs are reduced greatly.
Drying temperature can be adjusted from 25 to 150 according to process technological requirements.
Heat sensitive materials will not be denaturated or contaminated.
Drying powder can be discharged in 30-60min and the discharging rate is 99%.
Can dry liquid and pasty materials with high viscosity difficult drying.
Online automatic-cleaning, in accordance with GMP standard