UV protection shock tape

UV ELECTRIC SHOCK-TAPE

UV Electric shock-tape bird repel device employ the newest in technologies ensuring excellent pest bird control.The system can effective against all birds and will drive birds.

Shock pluses condition all birds to afraid the tape.The bird has a small body mass and is easily distributed by the sting passing through its foot or body.Their patterns change immediately.They do not like to be zapped.

The systems only need the shock-tape and energizer.you can find our energizer to match them.

HOW TO USE?

One harmless electrical pulse passes through the birds foot to complete the circuit.as follows:

ELECTRIC SHOCK TAPE

SURFACE PREPARATION

Surfaces must be DRY,OIL FREE,DUST FREE and UNIFIED/STABILE for proper adhesion.

Dry-Insure all surfaces are dry.

Oil free-use a 50:50 mixture of isopropyl alcohol and water.Isopropyl alcohol is rubbing alcohol .Glass cleaning and oil based cleaning solutions are not acceptable.For cleaning heavily oiled surfaces,a citrus based degreaing agent should be used.Follow up with isopropy alcohol:water mixture and dry surface.

Dust free-remnants of bird manure must be thoroughly removed.

Unified/stable-be cautious of loose surfaces like soft stone,poured concrete,rustes metal and bare wood.Remive all loose material.Use caulk under tape,or seal surface where tape will be applied with an acrylic sealant,or attach narrow metal strips over the surface and bond tape to them.

TO APPLY SHOCK-TAPE

*Peel back several inches of the polyethylene  liner;

*Firmly press the exposed adhesive to the substrate;

*Align,smooth and firmly hold unattached tape in place;

*Remove liner away from tape;

*Smooth tape with firm hand pressure;

*DO NOT tear shock-tape acrylic film top when applying to metal surfaces.

*The electrical insulation value of the film is necessary to prevent the electricity from arcing through to fasten tape;

*Use the spooler to hold tape rolls when 2 hands are needed;

*Prevent arcing on metal surfaces,trim flat wires at ends of tapes.

ELECTRIC SHOCK TAPE

CORNERS

Make corners without having to cut tape.By folding the tape twice,corners of angles up to 120  degrees can be made very quickly.

In the photos above,the res liner remains on to show how the wires are double insulated from each other when they do cross.

Step-by step cornering

Accessories