tpu lamination fabric

Specifications High insulation performance, it reduces 80% gas permeability when compared with common rubberized fabric

    The new odor-resistant TPU coating fabric is made of inner rubbe r layer, fabric reinforced layer, outer rubber layer and barrier layer. Fabric reinforced layer is woven by polyester fiber. Inner and outer rubber layers are formed from the double-face coated polyurethane on the fabric reinforced layer. Barrier layer is processed by special material and technology. This is a new barrier coating fabric that may obstruct volatilization of media like vapor and oil..   Main characteristics: Breadth 1.33m; Color: black, army green, sand yellow, etc.; High insulation performance, it reduces 80% gas permeability when compared with common         rubberized fabric; this may be used to store gasoline and reduce the gasoline volatilization; Light weight, high strength, puncture resistance, rear resistance, and the ambient applicable      temperature is -50~+80; The rubberized fabric thickness range is 0.95mm3mm. Main purposes: TPU (polyurethane) coating fabrics could be used for soft tank fabrication due to its superior properties. Gas, oil, water, wine, edible oil, soy sauce, various syrups, industrial grease, diesel, gasoline may be placed in the soft tank made of such fabric. It has advantages like light weight, folding, convenient, and strong environmental suitability Soft tank may be equipped to field oil depot, gas station, or applied for oil storing equipment and vapor recovery unit of rear oil depot. In addition, it may be used for collection of rain water, emergency water supply, logistics, fire fighting, metallurgy, electric device and oil field, etc.   Technical specifications table:

Specifications and models		JB-500	JB-840(1)	JB-840(2)	JB-1500	JB-3000	JB-3000D(J)
Thicknessmm		0.95-1.1	0.94-1.26	0.90-1.10	1.35-1.5	1.9-2.1	2.8-3.3
Weight(kg/m2)		1.0-1.2	1.20-1.25	1.18-1.23	1.56-1.64	2.3-2.55	3.3-3.55
Stripping strength(N/25mm)		300-370	134-141	124-148	141-260	228-268	226-378
Tensile-strength (N/25mm)	Warp direction	1860-1980	1030-1200	1107-1202	2790-2960	5180-5500	6660-7360
	Weft direction	1350-1560	932-1019	958-1202	2350-2500	5090-5300	7526-8033
Tearing strength (N/25mm)	Warp direction	100-130	157-167	194-231	250-270	560-590	1452-1704
	Weft direction	95-110	128-145	161-234	225-235	510-530	701-715
Puncture strength(N)		500-520	456-583	476-626	1010-1060	1580-1700

Noteit can be customized according to the customer demands for special requirements...