TM3TM3 Schneider Electric Temperature Input Module

Product Introduction

Modicon TM3 expansion module can improve the comprehensive performance of Modicon M221, M241 and M251 programmable controllers, including:

. Discrete I/O module is used to configure up to 264 discrete I/Os (depending on the controller type). The connection mode of the module is the same as that of the controller. The analog I/O module is used to configure up to 114 points

Analog quantity VO (according to the type of controller), and can also receive other sensor signals, such as position, temperature, speed, etc. In addition, it can also control the frequency converter or any current or

Equipment for voltage input signal

. The expert module that controls the TeSys motor starter uses RJ45 interface to communicate, and the integrated wiring safety module that simplifies the control area provides the necessary safety performance of the machine and simplifies the wiring,

It can be configured in SoMachine programming software. In addition, the TM3 expansion system has good flexibility. It can be connected remotely by using the TM3 bus expansion system.

. TM3 modules within 5 meters, such as TM3 modules installed in cabinets or other empty cabinets. Modicon TM3 expansion system in the overall Modicon M221.M241 and M251

The series of programmable controllers are universal and can support you to freely replace the controller without replacing the expansion module.

Schneider TM3 analog expansion module

TM3TM3 (screw) and TM3TM3 (spring) analog expansion module

2-channel input channel 16-bit (voltage, current, thermocouple, 3-wire RTD)

1 output channel 12 bits (voltage, current)

Pluggable screw or circlip terminal block

Main parameters of Schneider TM3 analog expansion module

Series name: TM3TM3

Number of channels: 2 inputs, 1 output

Rated voltage: 24VDC

Operation mode: self-scanning