Product description
Major grades: MC102, MC911, MC206 and MC509
Performance parameters:
- MC102:
- Density: 6.95g/cm3
- Hardness: 92.5HRA
- Flexural strength: 1800N/mm2
- Fracture toughness: 10.5
- Features: premise of ensuring strength has high red hardness and wear-resistant
- Suitable for finishing and ultra-fine finishing in low load and low impact force condition to processing of bearing steel, carbon steel, low alloy steel and gray cast iron
- Uses: finish turning
- Equivalent to classifications: ISO, P01-P05 and K01-K05
- MC206:
- Density: 7.0g/cm3
- Hardness: 92.5HRA
- Flexural strength: 2300N/mm2
- Fracture toughness: 11.2
- Features: high strength, high wear-resistant and low friction coefficient
- Suitable for finishing and semi-finishing of mild steel, normalizing gear steel, gray cast iron and ductile iron
- Uses: turning and milling
- Equivalent to classifications: ISO, K05-K10, P01-P10 and M05-M10
- MC509:
- Density: 7.1g/cm3
- Hardness: 92.1HRA
- Flexural strength: 2800N/mm2
- Fracture toughness: 12.4
- Features: high toughness and may bear heavy impact load
- General used for milling, medium rough turning of soft steel, gray cast iron, Al alloy and bearing steel
- Uses: milling and wearing piece
- Equivalent to classifications: ISO, P10-P20 and K10-K20
- MC911:
- Density: 7.05g/cm3
- Hardness: 92.3HRA
- Flexural strength: 2000N/mm2
- Fracture toughness: 11.3
- Features: performance between MC102 and MC509
- Hard to form crescent depression and suffered some impact
- High heat-resistant
- Suitable for semi-finishing of soft steel, gray cast iron, Al alloy and bearing steel and finishing of stainless
- Uses: truing and milling
- Equivalent to classifications: ISO, P15, K05-K15 and M05-M20
MC102:
- Density: 6.95g/cm3
- Hardness: 92.5HRA
- Flexural strength: 1800N/mm2
- Fracture toughness: 10.5
- Features: premise of ensuring strength has high red hardness and wear-resistant
- Suitable for finishing and ultra-fine finishing in low load and low impact force condition to processing of bearing steel, carbon steel, low alloy steel and gray cast iron
- Uses: finish turning
- Equivalent to classifications: ISO, P01-P05 and K01-K05
MC206:
- Density: 7.0g/cm3
- Hardness: 92.5HRA
- Flexural strength: 2300N/mm2
- Fracture toughness: 11.2
- Features: high strength, high wear-resistant and low friction coefficient
- Suitable for finishing and semi-finishing of mild steel, normalizing gear steel, gray cast iron and ductile iron
- Uses: turning and milling
- Equivalent to classifications: ISO, K05-K10, P01-P10 and M05-M10
MC509:
- Density: 7.1g/cm3
- Hardness: 92.1HRA
- Flexural strength: 2800N/mm2
- Fracture toughness: 12.4
- Features: high toughness and may bear heavy impact load
- General used for milling, medium rough turning of soft steel, gray cast iron, Al alloy and bearing steel
- Uses: milling and wearing piece
- Equivalent to classifications: ISO, P10-P20 and K10-K20
MC911:
- Density: 7.05g/cm3
- Hardness: 92.3HRA
- Flexural strength: 2000N/mm2
- Fracture toughness: 11.3
- Features: performance between MC102 and MC509
- Hard to form crescent depression and suffered some impact
- High heat-resistant
- Suitable for semi-finishing of soft steel, gray cast iron, Al alloy and bearing steel and finishing of stainless
- Uses: truing and milling
- Equivalent to classifications: ISO, P15, K05-K15 and M05-M20
Density: 6.95g/cm3
Hardness: 92.5HRA
Flexural strength: 1800N/mm2
Fracture toughness: 10.5
Features: premise of ensuring strength has high red hardness and wear-resistant
Suitable for finishing and ultra-fine finishing in low load and low impact force condition to processing of bearing steel, carbon steel, low alloy steel and gray cast iron
Uses: finish turning
Equivalent to classifications: ISO, P01-P05 and K01-K05
Density: 7.0g/cm3
Hardness: 92.5HRA
Flexural strength: 2300N/mm2
Fracture toughness: 11.2
Features: high strength, high wear-resistant and low friction coefficient
Suitable for finishing and semi-finishing of mild steel, normalizing gear steel, gray cast iron and ductile iron
Uses: turning and milling
Equivalent to classifications: ISO, K05-K10, P01-P10 and M05-M10
Density: 7.1g/cm3
Hardness: 92.1HRA
Flexural strength: 2800N/mm2
Fracture toughness: 12.4
Features: high toughness and may bear heavy impact load
General used for milling, medium rough turning of soft steel, gray cast iron, Al alloy and bearing steel
Uses: milling and wearing piece
Equivalent to classifications: ISO, P10-P20 and K10-K20
Density: 7.05g/cm3
Hardness: 92.3HRA
Flexural strength: 2000N/mm2
Fracture toughness: 11.3
Features: performance between MC102 and MC509
Hard to form crescent depression and suffered some impact
High heat-resistant
Suitable for semi-finishing of soft steel, gray cast iron, Al alloy and bearing steel and finishing of stainless
Uses: truing and milling
Equivalent to classifications: ISO, P15, K05-K15 and M05-M20