Sign In Join Free
1 / 6
thermoplastic spray safety materials manufacturers
| Model No. : | --- |
|---|---|
| Brand Name : | Changda |
Product description
thermoplastic spray safety materials manufacturers Specification: Suitable for a variety of mobile and self-propelled spraying type road striping machine to use; Due not to touch the surface when spraying, so it is not affected by the protuberance particles, speed to work and high efficiency; Coating uniform, edge tidy,linear smooth; High resin content, strong adhesion, good wear resistance, not easy to crack; Product cost advantages; Sprayed with either airless or conventional spray equipment; Sprayplastic is used for high output and recovery of existing road marking; Minimal traffic management is required during installation meaning disruption to other road users is kept to a minimun. other road users is kept to a minimun. Test Report of Reflective Thermoplastic Road Marking Paint Density /g/cm3 | 2.02 |
Softening Point/°C | 103 |
Color and appearance of coating film | After drying , no wrinkle, spot , falling off, sticking to the wheel .And the color and shape of coating has not large differences to standard plate |
Cure time /minutes | 3 |
Chromaticity Coordinates/(x,y) | X:0.318 Y:0.337 |
Compressive Strength/Mpa | 15.4 |
Luminance Factor | 0.80 |
Abrasion Performance/mg(200r/1000g reduce weight) | 55.2 |
Content of glass beads(%) | 22.6 |
Flow resistance | 39 |
Low temperature Anti-cracking of coating layer | Keep 4h in -10°C ,and lay 4h in normal temperature as a circulation .And continuously do three circulations , no crack |
Heating stability | Keep 4h in 200~220°Cin agitating condition, no obviously yellowing, burnt , blocked |
Density /g/cm3 | 1.95 |
Viscosity | 139 |
Color and appearance of coating film | After drying , no wrinkle, spot , falling off, sticking to the wheel .And the color and shape of coating has not large differences to standard plate |
Cure time /minutes | 10 |
Cover Rate(%) | 98 |
Chromaticity Coordinates/(x,y) | X:0.311 Y:0.328 |
Compressive Strength/Mpa | 13.9 -- 23°C±1°C 2.4 -- 50°C±2°C |
Luminance Factor | 0.83 |
Abrasion Performance/mg(200r/1000g reduce weight) | 21.5 |
Anti-watering | No abnormal phenomenon dunking in water for 24h |
Anti-alkali | No abnormal phenomenon dunking in calcium hydroxide saturated solution for 24h |
Flexibility/mm | 1 |
Solid Content/% | 71.2 |
ISO9001 Quality Certificate 
3M Authorized 
Send your inquiry to this supplier
Product Alert
Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.
Your use of this website constitutes acknowledgement and acceptance of our Terms & Conditions.
Copyright © 2009-2024 Bossgoo Co., Ltd. All rights reserved.
