The Accessory Of PVC Wall Panel Aluminum Strip

Product Description

The Accessory Of PVC Wall Panel Aluminum Strip

Silicone installation

1. Install the basic materials (usually use a 3mm thick Plywood, wooden board or Magnesium board) by nail.

2.Cut the UV panel to suitable size and repair the wound to be smooth by Sandpaper.

3.Chamfering of edge to be 45 degree angle. According to the practical requirements, you can choose chamfering two sides, threes edges or even four round.

4.Clean the back side of UV panel by sandpaper or duster cloth; make sure that the back side is 100% clean.

5.Apply the Silicone onto the back side of UV panel, sticking UV panel to the wall, hold on for a while and knock the panel slightly by one hand. Make sure that the panel and wall are matted then you can move on.

6.Filing the filler to the 45 degree angle connecting position of two panels to seal the connection.

7.Clean the wall and your room..

The intsall

Aluminum alloy frame

1.Install the basic materials (usually use a 3mm thick Plywood, wooden board or Magnesium board) by nail.

2.Nailing all the aluminum accessories.

3.Cut the UV panel to suitable size and repair the wound to be smooth by sandpaper.

4.Fitting your UV panel and clean your room

Decoration Images