T27 T41 coated abrasive flap disc super

Abrasive flap disc    Linyi Jinxing Abrasive and Grinding Tools Co.,Ltd     Introduction:   Flap Disc are created by overlapping coated abrasive flaps and adhering them firmly to a back-up plate. This design provides a cooler runing,longer lasting disc.And because new layers of abrasive are constantly being exposed, a very consistent finish is provided during the life of the disc.These discs are specifically recommended for high stock removal on stainless steel,carboon steel,aluminum,and most alloys. They offer many times the life of conventional resin fiber discs.   Flap Disc Feature: 1.Bonded to extremely strong but durable fibreglass or plastic backing 2.Fast ,aggressive action for high pressure grinding,high efficiency 3.Blending and finishing all in one operation and will reduce process time,lower total grinding cost 4.Maximum contact with work surface with out loading 5.Consistent grinding and finishing performance 6.Excellent performance and efficiencies on stainless and carbon steel application 7.Reduce vibration and noise compared to depressed denter grinding discs   Different grain   1. Aluminum oxide: grinding and polishing, carbon steel metal, iron, cost iron, welding rods etc.   2. Zirconia: grinding stainless steel professionally etc.   3. Silicon carbide: polishing wood, copper, stone, marble, building materials, hand materials, glass etc.   Flap Disc Application:   Application: 1. It is suitable for various normal metal, cast iron, wood grinding and polishing.   Rust removal,Deburring,Cleaning of welding seams.   2. T29,Depressed shape: grinding contour and edge, grinding angle 15-25°   3. T27,Flat  shape: grinding flat surface, grinding angle 0-15°    Primary Advantages of Flap Discs:
1. Abrasive flap discs grind and finish at the same time, saving both time and money.
2. Abrasive flap discs remove material aggressively. Its removal power is equal to depressed  center wheel but it works safer and offers a better finished surface.
3. Abrasive flap discs have a light weight design to reduce operator fatigue.
4. Abrasive flap disc are easy to use and requires very little surface pressure. Its especially cool cutting permits light contouring and avoids burning work-pieces by overheating.
5. Abrasive flap discs last up to 30 times longer than conventional fibre discs due to their overlapping flap construction.
6. Abrasive flap discs assure consistent performance as new particles are continually exposed during the life of the product.
7. Abrasive flap discs, due to its tough construction, allows for aggresive edge grinding.
8. Abrasive flap discs in conical shape enables the fullest contact between work-piece and disc surface.   Flap Disc Test Report:  

Flap disc grinding test 1	Product: flap disc	100*16mm grit size:60#
	Grinding timings	10 minutes
	Weight of flap disc before test	58g
	Weight of flap disc after test	54.8g
	Flap disc consumption after 10 minutes	3.2g
	Grinding object/workplace	modular ring
	Grinding object wt before test	746.8g
	Grinding object wt after test	691.7g
	Grinding object consumption after 10 minutes	55.1g
	Grinding ratio	17.2
	Gringing speed	5.5

 

Flap disc grinding test 2	Product: flap disc	100*16mm grit size:60#
	Grinding timings	10 minutes
	Weight of flap disc before test	54.8g
	Weight of flap disc after test	53.8g
	Flap disc consumption after 10 minutes	1.0g
	Grinding object/workplace	modular ring
	Grinding object wt before test	691.7g
	Grinding object wt after test	648.1g
	Grinding object consumption after 10 minutes	43.6g
	Grinding ratio	43.6
	Gringing speed	4.4

 

Flap disc grinding test 1	Product: flap disc	100*16mm grit size:60#
	Grinding timings	10 minutes
	Weight of flap disc before test	53.8g
	Weight of flap disc after test	52.2g
	Flap disc consumption after 10 minutes	1.6g
	Grinding object/workplace	modular ring
	Grinding object wt before test	648.1g
	Grinding object wt after test	589.4g
	Grinding object consumption after 10 minutes	58.7
	Grinding ratio	36.7
	Gringing speed	5.9

    Size of items  

Commodity	order code	material	size	speed	Pcs/ctn	application
abrasive  flap   disc	JX314716	AO,SC, ZA	100*16 4"*5/8	80m/s	400	applicable to grind metal ,stainless steel ,carbon steel etc
	JX315922		125*22 5"*7/8		300
	JX316123		150*22 6"*7/8		150
	JX318224		180*22 7"*7/8		100

                      Factory and Package        Contact Email: emilygong97ATyahoo.com Skype: emily1365897319