1 / 3
$250.00
≥1 Set/Sets
Model No. : | JCMA |
---|---|
Brand Name : | AILIPU |
Material : | Plastic |
Product description
1) Working condition display, liquid-level probe and remote ON/OFF connector, two output modes available
2) Manual flow adjust mode: pump will output according to your manual-chose frequency
3) Auto flow adjust mode: Signal received (Digital pulse signal)
1) Manual adjust flow through the key in the control panel
2) Pump LED ON/OFF indicator
3) Displayable frequency percentage
1) Working condition display, liquid-level probe and remote ON/OFF connector, two output modes available
2) Manual flow adjust mode: pump will output according to your manual-chose frequency
3) Auto flow adjust mode: signal received (4-20mA electric current signal)
JCMA36 Model
Model |
Max. Flow |
Max. Pressure |
Pipe Dia. (mm) |
Material |
JCMA36–2.5/10 | 2.5 L/H | 10bar |
In 4 Out 9.5 |
PVC |
JCMA36- 1.5/12 | 1.5 L/H | 12bar |
In 4 Out 9.5 |
PVC |
JCMA36- 0.8/15 | 0.8 L/H | 15bar |
In 4 Out 9.5 |
PVC |
JCMA45 Model
Model |
Max. Flow |
Max. Pressure |
Inlet Pipe Dia. (mm) |
Outlet Pipe Dia. (mm) |
Material |
JCMA45–15/1.5 | 15 L/H | 1.5 bar |
In 5.5 Out 9.5 |
In 4 Out 9.5 |
PVC |
JCMA45- 11/2 | 11 L/H | 2 bar |
In 5.5 Out 9.5 |
In 4 Out 9.5 |
PVC |
JCMA45- 7/3.5 | 7 L/H | 3.5 bar |
In 5.5 Out 9.5 |
In 4 Out 9.5 |
PVC |
JCMA45- 3.5/7 | 3.5L/H | 7bar |
In 5.5 Out 9.5 |
In 4 Out 9.5 |
PVC |
1) High speed operation: up to 400 strokes per minute results in high resolution chemical feed, with the elimination of slug-feed effects
2) Compact size: JCMA pumps are small, quiet, and lightweight
3) Long lasting diaphragm: The diaphragm is made up by PYFE, which is compatible with all kinds of chemicals. The life of the diaphragm is over 5 years, which 5 times as national standards GB/T7782-2008
4) Strong stability: Suitable AC100-240V, and suitable for 50-60 Hz range
5) High protection level: JCMA series metering pump protection level is IP65, and it can function safely under tough environment
6) Ball check valves: The protection ball, seat and guide assembly ensure tight sealing to prevent loss of prime
A: We are factory, and our factory has the independent research and development capacity
A: Generally it is 3 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: TT, LC. etc.....
Send your inquiry to this supplier