Specifications Invar36
Diameter:12-300mm
Density :8.1g/cm3
Materials: Inconel 600, 601, 625, 718, X750, Incoloy 901, 925, monel400.ect.
Invar 36 Chemical composition
Alloy | % | Ni | Cr | Fe | C | Mn | Si | Co | Mo | P | S |
Invar 36 | Min. | 35 | | Balance | | | | | | | |
Max. | 38 | 0.5 | 0.1 | 0.06 | 0.35 | 1.0 | 0.5 | 0.02 | 0.025 |
Invar 36 Physical properties
Density | 8.1 g/cm3 |
Melting point | 1430 °C |
Invar 36 Mechanical properties in the room temperature
Alloy state | Tensile strength Rm N/mm2 | Yield strength RP0.2N/mm2 | Elongation A5 % | Brinell hardness HB |
Invar 36 | 490 | 240 | 42 | ≤200 |
Characteristic
36 alloy is a special ultra-low coefficient of heat expansion of low-iron-nickel alloy. One of carbon and manganese element of control is very important. Cold deformation can reduce the coefficient of thermal expansion, in particular within the framework of the heat treatment temperature coefficient of thermal expansion will enable stabilization. Has the following characteristics:
1.Has very low coefficient of heat expansion between the temperature of -250°C and 200°C.
2.Good toughness and plastic Metallurgical structure
Invar 36 is the face centered cubic lattice structure Corrosion resistance
Invar 36 has corrosion resistance in the dry air of room temperature. In other harsh environments, such as the humid air, there may be corrosion (rust). Applied field
Invar 36 suit for need to apply ultra-low coefficient of heat expansion environment. Typical applications are as follows:
1.Liquefied gas production, storage and transport
2.The measurement and control instruments work temperature lower than 200°C, such as temperature regulating device
3.Metals and other materials use the screw connector bush
4.Bimetal and bimetallic temperature controller
5.Film framework
6.Shadow mask