stainless steel cut shot 1.2mm

Specifications Stainless Steel Shot

dia: 0.3-6.0mm

Material: SUS 304, 302, 201

202, 430, 410

Stainless Steel shot Size 0.3mm-6.0mm
Standards for the production of stainless steel shot
The products strictly comply with international standards: AMS2431, MIL-S-13165C, DIN8201 and VDFI8001 Main technical indicators of stainless steel shot

Product Description		Stainless Steel Round Shot
Chemical Composition	Carbon (C)	≤0.12%
	Manganese (Mn)	≤2.00%
	Silicon (Si)	≤1.00%
	Chromium (Cr)	17~19%
	Nickel (Ni)	7~10%
	Sulfur (S)	≤0.03%
	Phosphorus (P)	≤0.035%
Average Hardness (measured under 500g load)		41~59HRC(388~509HV)
Hardness Deviation		The maximum range of deviation is ±1.0HRC or ±40HV.

 Note: other chemical composition may be provided as per users’ requirements.
    304 Austenite Type: C 0.25%, Cr = 16-18%, Ni =6-10%, Si 1%, Mn 2%; 430 Ferrite Type: C 0.25%, Cr = 16-18%, Si 1%, Mn 2%; 410 Martensite Type: C 0.25%,Cr: 11-13%, Si 1%, Mn 2% Used for surface cleaning, sand-removing, descaling, deburring and shot peening of small, medium and large-sized pieces of large-sized, small and medium-sized alloy steel precision castings, stainless steel forgings and stampings, copper and zinc alloys, aluminum and magnesium alloy die castings, copper and zinc alloy stainless precision castings, stainless steel forgings and stampings, stainless steel plates, stainless steel pipes, moulds, glassware and stones etc.