SS316 tubular milk pasteurizer for sale/small pasteurization machine for sale

SS316 tubular milk pasteurizer for sale/small pasteurization machine for sale       Specification 

SSHE( Scraped Surface Heat Exchange) Parameter List
Number	Name		Parameter,material
1	A-A2000	Efective Heat Exchange Area	1.0 square meter
	A-A1500		0.75 square meter
	A-A1000		0.5 square meter
	A-A2000T		1.3 square meter
2	Heat transfer capacity		200-360 Btu/(ft ²*h*°F)
3	Scraper material inner surface cleanliness		PEEK,PVDF,PDM,SUS316L
4	Material inwall fineness		Ra≤ 0.2μm
5	Material inwall 's hardness after chromplate treatment		Rockwell hardness 85~90
6	Scraper rotor speed		160~400 RPM
7	Material cylinder seal		Sanitary mechanical   seal
8	Material  layer  resistance  to  pressure		≥ 3.0MPa
9	Heat-resistantance of material layer		-20°C-135°C
10	Materials for cylinder and  flange		SUS304, SUS316L
11	Connection of medium		Welding with opening for medium
12	Medium sealing of detachable inner		"0" shape ring and PTFE gasket
13	Temperature endurance of medium layer		-40°C-180°C
14	Medium layer thermal resistance		-20°C-150°C
15	Pressure endurance of medium layer		≥ 2.0MPa
16	Pressure  endurance of detachable  inner medium layer		≥ 1.5MPa
17	Material of inner flange and medium tank		SUS304, SUS316L
18	Insulating material		Asbestosl,polyurethan
19	Material after insulating layer		SUS304 ( thinkness : 1.0mm)
20	Material inlet		1.5~3 inch Clip type or flange or flange
21	Material outlet		1.5~4 inchClip type or flange or flange
22	Medium inlet		2.5~3 inch flange
23	Medium outlet		2.5~3 inch flange
24	Installation method		Horizontal ,vertical
25	Effective length	A-A2000	2000mm
		A-A1500	1500mm
		A-A1000	1000mm
		A-A2000T	2000mm
26	The length of installation	A-A2000	3000mm
		A-A1500	2500mm
		A-A1000	2000mm
		A-A2000T	3000mm

  Our scraped-surface heat exchange (A unit) is similar to Votator type of equipment and share many small component.  Mechanical seal and scraper blades are typical interchangeable parts.  The heat transfer cylinder consists of two pipe in pipe design with inner pipe for product and outer pipe for cooling refrigerant.  Each cylinder is jacketed, insulated and cladded with stainless steel for use with direct evaporative refrigerant.  Each cylinder features an external surge drum with liquid level control valve, sight glass, safety valve, evaporation pressure regulating valve, electronic pressure transmitter and pressure gage.   Each rotating shaft is concentrically mounted within the cylinder and has 4 rows of floating type scraper blades in a maximum configuration.  The shafts are directly driven by individual 10~22 kW geared motors. The TEFC motors drives will be suitably guarded.  Each drive is normally connected with a current sensing device mounted in the control panel.  The current sensing device will automatically switch off the cooling in case the drive approaches current overload. This feature also protects against freeze-up. The shafts are fitted with a rotary union to allow for the internal circulation of warm water and provision to flush mechanical seals is also included.   An integral electric heater with circulation pump to service the shaft heating is included.   All other product contact parts are made from stainless steel.  Blades are standard with long lasting PEEK or inexpensive POM and seal parts, 'o' rings etc. will be compatible with product.  The support frame will be stainless steel SS304 square tube and no mild steel parts.     Additional Technical Data:   1. Annular Space 9 ~ 10mm 2. Total Heat Exchanger Area 1.1 m2 3. Max Product Tested Pressure 120 bar 4. Number of Cooling Systems 1 5. Approximate Weight 1500 kg 6. Approx Dimensions (LxWxH) 2442 mm L x 300 mm dia 7. Required Compressor Capacity 45kw at -20°C 8. Shaft Speed, VFD drive 300 rpm 9. Blade Material PEEK, POM, SS 10. Shaft heating - heater 6 kW 3 ph - pump 0.1 kW 3 ph               We are focused in design,engineering and manufacture of  processing equipment in the food insudtry. With experienced engineer from Canadian Unilever,we are the leading supplier of margarine production equipment in China. We are albe to provide customers with reliable,sanitary and fully automatic food processing equipments. we provide one-stop shopping in equipment,engineering ,field installation and startup services. we have sold over 30 margarine/food prodcution lines in China,including name like Unliever China,China Cereals and Oils.                                  Pls contact me by whatsapp for more picture & video