Smernit Wireless Switch 220v Smart Wifi Wall Switch Wireless Remote Control light Switches Waterproof Touch Push Button Switch

No wire required,Easy to add a switch

Service life>6-8 years

Battery pressing time>300,000+ Switch time>600,000+ Receiver on/off times>400,000+ Long remote control distance

voice control

Can connect with Amazon Echo,google home

Remote control

easy to turn off the lights when not at home Connectable apps: King Smart, Smart Life, Tuya Smart

Do you often encounter these problems?

1.Old house 2.Wet place 3.Wet place 4.Complex line 5.Wooden wall These problems prevent you from installing the switch normally.

The complete wall is destroyed?

Wireless switch to help you solve these problems

Can be pasted to any location

No wire required,Easy to add a switch

Combination of wireless switch with the traditional switches diagram

Witing diagram of sdd wireless switch to traditional switch

Suitable for <1000W appliance

LED lamp sport light compact fluorescent incandescent fan light

1 one-gang switch controls 1 receiving controller

2 two-gang switch controls 2 receiving controllers

1 one-gang switch controls 1 receiving controller

One master switch control. Press the left button to turn on and press the right button to turn off.

3 one-gang switch controls one receiving controller

2 two-gang switch controls 2 receiving controllers. One receiving controller can be connected with 8 different switches. There are also many other combinations, depends on your needs.

Use receiver into EZ mode 1. Press and hold the key on receiver around 5s 2. LED indicator blinks in red →in green, then loosen your grip 3. Open King Smart APP, login your account. 4. Tap "Tap+ Add Device" 5. Choose EZ Mode, Tap"Confirm green indicator rapidly blink" 6. Enter Wi-fi Password, Tap" NEXT" 7. The phone is connecting the device 8. After connecting , Tap control the lamps

Use switch into EZ Mode 1.Press and hold paired switch for around 30s 2. LED indicator blinks rapidly then twice slowly, loosen your grip 3. Press the switch again 4. LED indicator on receiver blinks in green rapidly 5. Open King Smart APP, login your account. 6. Tap "Tap+ Add Device" 7. Choose EZ Mode, Tap"Confirm green indicator rapidly blink" 8. Enter Wi-fi Password, Tap" NEXT" 9. The phone is connecting the device 10. After connecting , Tap control the lamps

Press and hold receiver button for 2s, loosen your grip when LED indicator blinks in red, press a switch to pair, Switch open and learning success.

Press and hold paired switch for around 20s LED indicator blinks rapidly, then loosen your grip, press a new one to pair, Switch open or close and learning success.

Press and hold paired switch for around 60s, LED indicator changes from; blinks rapidly → secondly 8 times slowly → thirdly blinks 9 times at slower speed → finally once at slowest speed ,then loosen your grip, press the switch again, switch open or close and delete success.

Press and hold the key on receiver for around 20s , LED indicator changes from : blinks in red→ then in green → finally in red, then loosen your grip, and all switch codes learned from the receiver will be deleted.