Slitting coils 5x1500 mm

Slitting coils 5x1500 mm can decoil, slit and recoil big steel coils as required width standards.

Slitting coils 5x1500 mm Line parameter(For reference)
Steel coil parameters
1.Raw material: ST37
2.Raw material strength: σs≤235Mpa σb≤500Mpa
3.Raw material thickness: 4.5~5.0mm
4.Coil width: 1000~1500mm
5.Suitable coil ID: Φ508/Φ610/Φ760
6.Suitable coil OD: Φ1000~Φ1700mm
7.Coil loading capacity: max 25Tons
Finished products parameters
1.Slitting pieces numbers:
4.5mm≤t≤5mm, 10 pieces
2.Minimum slitting width: ≥50mm
3.Slitting width tolerance: ≤±0.1mm
4.Slitting straightness accuracy: ≤0.8mm/1000mm
5.Recoiling ID:Φ508mm
6.Recoiling OD: ≤Φ1700mm
Other parameters
1.Slitting speed: ≤60m/min
2.Slitting mode: Dynamic shear, tension shear
3.Electric source: 380V/50HZ Three phases five wires system
4.Total power: 280kw
5.Driving motor:
Five rolls leveling machine: DC adjustable speed motor DC30kw
Slitting machine: DC adjustable speed motor DC55kw
6.Floor space: Length29m x Width9.5m x Height 4m
7.Working direction: From the left to the right(Facing line on the operation table side)
8.Operator numbers: Two technical workers, two common workers
9.Equipment color: As the request of customer
Slitting coils 5x1500 mm Line summarize and configuration
1.Coil car(Include installing base) 1suit
2.Hydraulic decoiler 1suit
3.Coil head straightening and leading equipment 1suit
4.Material drawing and leveling machine 1set
5.Coil head cutting machine 1set
6.Loop 2 sets
7.Guiding equipment 1set
8.Slitting machine 1set
9.Slitter edge winding machine 2sets
10.Tension control table 1set
11.Recoiling machine(Include supporting arm, distributor) 1suit
12.Exit coil car for recoiler 1set
13.Hydraulic and lubricating system 1suit
14.Electrical system 1suit
Slitting coils 5x1500 mm Technical procedure
Loading→ Decoiling→ Leveling→ Coil head shearing→ Loop→ Guiding→ Slitting→ Loop→ Tension control→ Recoiling→ Getting off line

The whole Slitting coils 5x1500 mm line show

Packing and shipping about the Slitting coils 5x1500 mm

About our maxmach group