SK6812 built-in IC, 5050RGB, 144 lights, magic lantern bars, whiteboard irrigation and waterproof

144 paragraph 144 lights Symphony sk6812 light bar Features:

Full color soft light bar one meter144 144 light is not waterproof, soft light on the back of the use of 3M ultra-adhesive double-sided adhesive, every 5 meters for a plate, each end of the three-and three-color plug connector plus two-color power

1. Each lamp bead is a pixel,

2. Each pixel can be single point single control

3. Each individually controlled pixel can achieve 256 gray levels

4. Each pixel is a separate first paragraph, you can arbitrarily cut

 

product composition:

Full-color light bar one meter 30 section 30 lights = drive IC + lamp beads + capacitor + FPC line soft board (white board, blackboard optional) + on the plug and three connectors + power supply two connectors every 5 meters for a static bag package

 

Size parameters:

1. The number of lamp beads: 144 / m

2. Number of drives: 144 / m

3. Number of segments: 144 / m

4.FPC board width: 12MM

5. Working voltage: 5V

6. Power: 0.3W / stars 9W / m 45W / disk

7. Pressure drop distance: 5-10 meters

   

Product selling point:

1. A lamp bead is a pixel, one meter has 144 pixels

2. Each pixel is 256 grayscale

3.FPC circuit board is simple and easy to fail

4. All-round protection with silicone casing

5. Both ends of the humanized connector, better and more convenient to use

6. Product luminous brightness super-use the same lamp with the highest

Luminous color

Main wavelength (nm)

Luminous intensity (mcd)

Operating current (mA)

Operating voltage (V)

Red light

620-630

550-700

20

1.8-2.2

Green light

515-530

1100-1400

20

3.0-3.2

Blue light

465-475

200-400

20

3.2-3.4

 

Scope of application:

1. Hotel / nightclub / KTV and other places of the polygonal wall. Water droplets line smallpox, from decorative atmosphere;

2. Building. Advertising wall. Signs. Festivals and other decorative areas of the city from the United States / lighting effect;

3. Home decoration lighting (staircase. Door frame. Bar. Wine cabinet. Wardrobe. TV cabinet. DIY home decoration -);

Car beauty (car body. Car bottom -);

5. With the landmark building buildings pavilions, bridges, parks and other outline of the outline, from the embellishment of lighting effect.

6. Illumination signals (such as various light-emitting instructions)

7.Edge-Lighting transparent or diffused material

8. Support underwater lighting works

9. Canopy and bridge arched edge / amusement park / theater / aircraft cockpit lighting

 

Installation:

Power + controller + light bar

1. First look for the direction: Each section of the light bar has some small arrows, arrows for the direction of the output, said the signal forward; arrow tail direction for the input, the direction of our link signal wiring;

2. The input of each roll of light (that is, the top of the arrow on the light bar) has a three-color (red and green) pair of plugs with a two-color (red and white)

Three-color connector (red and green white) then the controller:

                      Red - positive pole vacant (or 5V power positive)

                      Green - signal connected to the controller above the output port is usually: DATA

                      White - ground connection to the controller above the ground (that is, 5V negative) is usually: GND or COM

Two-color connector (red and white) then power supply:

                      The positive pole of the red-positive 5V power transformer is usually: + V

                      White-negative 5V power transformer The negative terminal above is usually: -V or COM