SERVO Medicine bottle blowing machine Features: 1,Excellent mechanical strength, impact-resisting, and non-cracking bottle mouth and thread are of precise measurement, enabling 100% close match with the bottle cap.
2,The weight of the product can be preset with consistency.
3,The measurement and thickness of the product can meet the requirements of the design without any deviation. The surface of the bottle mouth and the body is of good luster and smoothness.
4,No rough selvedge will occur at the mouth or bottom of the bottles, which can save raw material.
5,There is no joint seam on the bottom of the bottle; And the strength is improved.
6,The joint seam on the bottle body is smooth.
7,Accord with GMP authentication requirements Characteristics
1. Adopt electro-hydraulic hybrid servo system can save 40% power than usual.
2. Apply the double vertical pole and single horizontal beam to make enough rotation space, longer bottles, make the mold installation easy and simple Model: GT45S
NO | Item | Unit | Data | 1 | Dia.of screw | mm | 45 | 2 | Screw L/D | | 24 | 3 | Shot volume | cm3 | 325 | 4 | Injection weight | g | 250 | 5 | Injection pressure | Mpa | 167 | 6 | Max.screw stroke | mm | 210 | 7 | Max.screw speed | rpm | 10-235 | 8 | Heating capacity | Kw | 8.5 | 9 | No.of heating zone | Qty | 3 | 10 | Clamping blowing system | | | 11 | Clamping force of injection | KN | 400 | 12 | Clamping force of blowing | KN | 150 | 13 | Opening stroke of mold platen | mm | 120 | 14 | Lifign height of rotary table | mm | 60 | 15 | Max.platen size(L×W) | mm | 580×390 | 16 | Min.mould thickness | mm | 240 | 17 | Heating capacity of mould | Kw | 2.5 | 18 | Stripping system | | | 19 | Stripping stroke | mm | 210 | 20 | Driving system | | | 21 | Motor power | Kw | 20 | 22 | Hydraulic pressure | Mpa | 14 | 23 | Product range | | | 24 | Suitable bottle range | L | 0.015~0.8 | 25 | Max.bottle height | mm | ≤200 | 26 | Max.dia.of bottle | mm | ≤100 | 27 | Other | | | 28 | Dry cycle | s | 4.5 | 29 | Min.air pressure | Mpa | 1.2 | 30 | Discharge rate of compressed air | m3/min | >0.8 | 31 | Water flowage | m3/h | 3.5 | 32 | Total rated power with mould heating | Kw | 30 | 33 | Dimension(L×W×H) | mm | 3800×1600×2230 | 34 | Net weight | T | 7.5 | Materials:Suitable for majority kind of thermoplastic resins such as HDPE,LDPE,PP,PS,EVA and so on. Cavity number of one mould corresponding to product volume.(For reference) Product Volume | 15ml | 20 ml | 40 ml | 60 ml | 100 ml | 120 ml | 200 ml | Cavity quantity | 10cavity | 9 cavity | 7 cavity | 6 cavity | 6 cavity | 5 cavity | 5 cavity | Send your inquiry to this supplier Send Inquiry
|