Specifications Sea water pump factory
1.Capacity:50-22700cbm/h
2.Head:10-220m
3.Electric motor
4.CE certi
OTS series Sea water pump factory PICTURE:
SPECIFICATION : Capacity: 50-22700m³/h Total Head: 10-220m Motor Rating: 15-2500kw Discharge nozzle: 80-1400mm Speed: 485-2950r/min Liquid temperature: Max 104°C Liquid: Fresh water/Industries/River water/Sea water/Saline water/Paper water/Hydro-carbon etc Shaft Seal: Gland packing/ Mechanical seal Flange: GB, ISO, ANSI Operating pressure: 2.5mpa Max Other specifications can be available if required. OTS series Double suction axially split centrifugal pumps are our new generation products with abroad leading technologies. The series pump features in higher efficiency, lower NPSH, lower running noise and stable with a wider application, like waterworks, irrigation and drainage pump station, industrial water supply system, firefighting system, marine industry, refinery industry and so on. FEATURE:
Type OTS series double suction horizontal splite case centrifugal pump. Split case design permits easy disassembly, that is, inspection is simplified, it is not necessary to disturb pump alignment and suction&siacharge piping when parts replacement is necessary. Double suction with advanced design if suction performance ensures high suction lift ecen with large capacity. High operation efficiency over a wider rang of capacities. Meanwhile the pump can be operated at both 50HZ ans 60HZ. Pump operation with low noise and stability in use ensure confortable environment. Variable combination of materials permit wide application. Drive shafe end of the pump optionally on the left or right. Shaft seal uncooled soft-packed stuffing box or uncooled single acting unbalanced mechanical seal etc. CONSTRACTION:
PERFORMANCE CHART:
CERTIFICATION :
CATELOGUE: Shanghai Pump Manufacture Co.,Ltd dedicated in manufature pumps from 1930. There are 50 series,more than 3000 models. Here is part of our main product series:
Production: | Application: |
OTS Series Double-suction Axial Split Centrifugal Pumps | Water workd,irrigation,drainage and industrial water supply system, firefighting,marine,refinery industry etc. |
OTk Series Double Impeller Double-suction Axial Split Centrifugal Pumps | Water workd,irrigation,drainage and industrial water supply system, firefighting,marine,refinery industry etc. |
NLO Series Vertical Condensate Pumps | Transporting condensate water or other similar liquids for 50-1000KW power units. |
HL Series Vertical Mixed Flow Pumps | Power station water circulation,urban water supply and drainage,hydraulic engineering, irrigation etc |
ZL Series Vertical Axial Flow Pumps | Power station water circulation,urban water supply and drainage,hydraulic engineering, irrigation etc |
HPK,HPN Series Hot Water Circular Pumps | For pipelines or closed circulating hot water firculation in power plant, Metallurgy,chemical etc |
CG Type Boiler Water Supply Pumps | For power plant high pressure boiler water supply,dephosphorization in steel plant ,chemical and other pressure media fiels. |
MF,MN Series Sewage Pumps | Conveying industrial waste and urban licing waste water without solid and fibers. |
S,SH,SA Series Single Stage Double Suction Centrifugal Pumps | Flowing clean water without any solid particles or any other liquids similar with physical and chemical properties. |
Y Series Centrifugal Oil Pumps | Transferring petroleum products without solid and other similar products |
NW Series Drainage Pumps | Draining low-pressure heater water in fire power plant |
XBD-S Series Firefighting Pumps | Water fire fighting |
In order to choose the best model for you. This infomation will be needed when you send us enquiry: 1.Capacity 2.Head 3.Liquid and more info if it is special liquid 4.Liquid Temperater 5.NSPH 6.Special Material requirement 7.Electric motor and requirements about the motor 8.Other special requirements