S243 thread locker anaerobic adhesive

S243 is a one-component, medium strength, thixotropic viscosity, anaerobic type screw thread locking and sealing glue. This product in two close coordination between the metal solidification when cut off from the air.   APPLICATION Mainly for the need to manually remove the thread locking and sealing. Apply to oil surface and inert surface. Apply less than M20 thread type.   TYPICAL

	TYPICAL VALUE	TYPICAL RANGE
Chemical Type	Methyl Methacrylate fat
Color	blue
Viscosity (mPa.s@25°C)	2100	1600-2400
Specific Gravity(@25°C)	1.05	1.00-1.10
Gap Fill(mm)	0.13
destroy moment(N*m)	20	15-22
Average remove torque(N*m)	8	6-14
Temperature(°C)		-54-149
Fixture Time(min@25°C)	15	10-30
Cured Time(h@25°C)	24

  DIRECTION FOR USE For locking the best effect, the glue should be oil free surface, clean, and make sure the glue is filled with the whole meshing clearance. For hole, place a few drops of glue liquid coating on threaded parts with hole mesh. For blind holes, will a few drops of liquid rubber coating thread inside the hole to the bottom. For sealing liquid in leading to a circle of glue onto the thread. Keep first lap thread without adhesive solution. Pushes it into the threaded hole. For large screw and hole, adjusting the dosage of the glue liquid, and liquid from a circle of glue onto the thread. In the absence of enough strength before assembly, do not move.   NOTICE This product is not used for pure oxygen or oxygen-enriched system.Cannot be used for storage of chlorine has strong oxidizing substances.Don't take back the glue, prevent pollution original packaging.This product is used for plastic products. Workplace should ventilated, or forced ventilation. Please keep away from children. This product contains acrylic and methacrylic acid esters.It basically is mixed to the skin, eye has stimulative effect. If gets to skin, please immediately with soap and water cleaning. If you touch the eyes carelessly, please use a lot of clean water and call a physical attention. Please refer to the details of this product MSDS .    PACKAGE Order code:1222023 50ml/bottle Order code:1222030 250ml/bottle   STORAGE Store the product in a clean and dry location in unopened containers at 8-28°C. Shelf-life:18month About Us Our transportation Our contact details