Roll material handling equipment/conveyor belt for industrial
high temperature conveyor belt for industrial
Characteristics for rubber high temperature conveyor belt : 1.Heat Resistant Conveyor Belt This kind of conveyor belt selects cotton canvas or EP canvas as skeleton material and adopt ethylene-propylene rubber or syrene butadiene rubber as coating with good heat resistance. Suitable for conveying hot material like powder or clump materials at high temperature.
Ideal for conveying sintered ores, cokes, soda ash, chemical fertilizer, slag and foundry.
2.It can resist high temperature. the heat resistant conveyor belt is mainly used to transport high temperature materials
3.The range of the temperature It can be divided into four types according to working temperature range: HRT-1 <=100°C, HRT-2<=125°C, HRT-3<=150°C,HRT-2<=175°C Models of heat resistant conveyor belt:
Heat resistant conveyor belts fall into three models
Mode1: able to with stand the test temperature of less than 100°C, code S1
Mode2: able to with stand the test temperature of less than 125°C, code S2
Mode3: able to with stand the test temperature of less than 150°C, code S3
Mode4: able to with stand the test temperature of less than 175°C, code S4
The physical and mechanical properties of the heat resistant covering layer after tested should be in accordance with the following table: |
Project | The type |
T1 | T2 | T3 | T4 |
Change the range |
Hardness | Draw the intensity | +20 | +20 | +20 | +20 |
Maximum after wearing out | 85 |
Draw the intensity | The minimum value Mpa after wearing out | 12 | 10 | 5 | 5 |
Performance rate of change /% | -25 | -30 | -40 | -40 |
Break person who extend | Performance rate of change /% | -50 | -50 | -55 | -55 |
After aging rate of change /% | 200 | 200 | 180 | 180 |
The heat resistance conveyor belt abrasive wear of the cover rubber
Type Item level | Abrasive wear |
type I | type II | type III |
First quality | 0.8 | 1.0 | 1.0 |
accepts | 1.0 | 1.2 | 1.2 |
The heat resistance conveyor belt layer to layer adhesion strength
Item | interlayer of cloth | cover layer and cloth interlayer |
Thickness of the cover layer≤1.5mm | Thickness of the cover layer>1.5mm |
The average value of the longitudinal specimen shall be no less than | 3.0 | 2.2 | 2.6 |
The peak value of the longitudinal specimen | 2.0 | 1.6 | 2.0 |
The use of heat resistant conveyor belt
Please feel free to cotact with me