Rock Crusher Double stage crusher can be widely used in crushing coal gangue, shale, clay, slag, limestone, construction wastes, tailing ore and other materials. It is easy for it to crush high moisture materials with the following features. Product Features: i Double rotor s crushing material two times at upper end and lower end The tandem two sets of rotors, under the fast spinning, the lower rotor’s hammers re-crush the material which is firstly crushed by the upper rotor’s hammers, inner machine material collide each other, so hammer crushing material, material crushing material, unloading directly. iiNo bottom grate sieve, high wet material never plug machine The traditional crusher with grate sieve can’t adapt to crush the material which moisture ratio more than 8%, if the moisture ratio more than 10%, more easily brings the serious plug, the crushed material can’t be discharged, leads to the hammers repeating wear and tear, and even motor is burn out, seriously affecting production. But the double stage crusher without bottom grate sieve and no obviously limited on the moisture ratio, never appearing the plug for crushing the overwet material, and never say that fine powder can’t flow out in time and material be re-crushed, so the double stage with high crushing ratio and hammers work availably. iiiUnique two-way gap adjustment technology when hammers after wear and tear, the gap between hammers and liner-plate becomes large, so material particle would coarsen, at this time move the hammers outward by the center, to narrow the gap between hammers and lining plate. Reducing the cost greatly, meanwhile the double stage crusher equipped with the hydraulic open and close housing case, easy maintenance, security and reliability.
Technical Parameter: |
Model | SF1000*1200 | SF900*1000 | SF800*800 | SF800*600 | SF600*600 | SF600*400 |
Feeding Machine Size | ≤200 MM | ≤150 MM | ≤120 MM | ≤120 MM | ≤100 MM | ≤100 MM |
Out-material Size | ≤3 MM (0~0.15mm 50, 0.15~2mm 35, 2~3mm 15) |
Capacity | 90~120CBM/H | 60~80CBM/H | 50~70CBM/H | 40~60CBM/H | 25~35CBM/H | 15~25CBM/H |
Moisture Ratio | moisture ratio not limited obviously, generally <50 all can do |
Motor | 110+90KW | 75+55KW | 55+55KW | 45+55 KW | 22+30 KW | 18.5+22 KW |
Machine Weight | 8T | 7T | 5T | 4T | 1.8T | 1T |
Hammers Quantity | 56Pcs | 48 pieces | 40 pieces | 32 pieces | 32 pieces | 24 pieces |
Hammer total weight | 696kg | 596kg | 400kg | 304kg | 169kg | 80kg |
Lining plate Quantity | Large 16pcs Small 9pcs | Large 16pcs Small 9pcs | Large 14pcs Small 9pcs | Large 14pcs Small 9pcs | Large 13pcs Small 7pcs | Large 11pcs Small 5pcs |
Lining plate total weight | 800kg | 550kg | 450kg | 392kg | 109kg | 106kg |
Overall Dimension | 4500*2000*2600MM | 3500*1600*2200MM | 3400*1510*2150MM | 3400*1310*2150MM | 2700*1200*1750MM | 2480*850*1620MM |