remote automatic control pulsating waveform anodizing switch power supply

Specifications IGBT high frequency technology

electricity saving >15%

reliable for long life time

remote automatic control

time saving

 Remote automatic control pulsating waveform anodizing switch power supply , the company advantage: 1.Always concentrate on rectifier R & D, production, quality control and service.  2.Various patents obtained for outlook, functions, structures etc.  3.We are factory, have manufacturing ability and good craftwork.  4.Good resources for materials lay firm basis for quality control.  5. High quality, quality control follows ISO9001:2008 and Chinese military standard. 6. EMC & LVD directive complied with, CE certified.  7. Full load testing ability.  8. Technical service available before sale and after sale.  9. Have rich foreign trade business experience.   Technical Datas:

Input voltage		3-phaseAC200/220V±10% or AC380/400V/400V±10% 50/60Hz
Output current		600-50000 A, can be customized
Output voltage		0-50V, can be customized
Control method		IGBT transitor controlled pulse-width modulated
Rated·cooling		Continuous/Forced air cool or water cooling
Conditions  of Use	Ambient temperature	0~40C degree
	Relative humidity	30%~85%
	Altitude	1000m or less

                            Pulsating waveform aluminum anodizing power supply achieves better quality oxidation surface: The oxide quality is better if anodizing is carried out by using a pulse rectifier, the average current of which is equal to the one of a conventional rectifier. This advantage is proved by several tests and can also theoretically be explained.   Time saving: Experience shows that by using a pulsating waveform it is possible to carry out anodizing (and also other electrodeposition treatments) at a higher average current in comparison with conventional direct current.
This may well be due to the cooling of the oxide layer in the interval between two consecutive pulses, following the known “recovery” theory. Therefore by using pulse rectifiers it is possible to get the same thickness in shorter time, with the benefits of 20-25% approx. time saving.  BETTER QUALITY (by using the same average current)    Product Picture:                   Remote automatic control net picture:        Production site pictures: high quality cooper raw material                                         Patent transformer production area                                           Production line                                                                          Testing equipment                                  Packing and delivery:              Product Features:   1. Multi-modules, seperate units,cabinet-type composite modes, fully-sealed, dustproof and waterproof.  2. 70% smaller and 60% lighter than thyristor controlled rectifier.  3. With low output voltage and large current, products adopt high-frequency link switching power supply and high efficiency, energy saving over 16% .  4. Patent transformers avoid the disturbance of No.5 and No.7 low-order harmonics on power grid, capacity damage on electric circuit and switch board room, without extra-equipping harmonic device and saving cost.  5. Adopt APF technology, improve the imput power factor as high as 94%, reactive compensation cabinet.  6. Complete with protecting measures of output voltage limiting, current limiting, overvoltage, under voltage, over current, shourt circuit and default phase.  7. Adopt modularized N+1 redundancy design, realize the maintaining power without stopping machine and realize the failure-freee operation in production.  8. Adopt full-computer and fully-digital smart control system, benefit production management and get involved in DCS system.  9. Control accuracy and average current in modules shall be controlled within 1%, so as to guarantee high-standard requirement of the evenness, compactness and abrasive resistance of oxidation film.