Protecting Tapes

Specifications Protective Tapes for

steel corrosion protection,

corrosion protection coating,

pipe corrosion protection,

pipe protection

Protective Tapes, Protective Tape, Protecting Tapes System Description: The Outer Tape T-200 series is cold applied tape coating systems for Protection of the pipe and its T-100 Series surface from damages. The Adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine. Product Advantages: Heavy duty adhesive. Conformable to irregular shapes. No release liner. Established in ground history. Complies with AWWA (American Water Works Association) C-214 standard. Compatible with general coating systems. T-200 Outer Tape (Protective Tapes, Protective Tape, Protecting Tapes) series Coating Systems with AWWA C-214 Standard:  

Type of the tape:		T-240		T-250		T-265		T-280		T-2100		T-2130
Thickness: (ASTM D 1000)	Total	mm	mil	mm	mil	mm	mil	mm	mil	mm	mil	mm	mil
		0.38	15	0.51	20	0.64	25	0.76	30	1.02	40	1.27	50
	Film	0.28	11	0.38	15	0.51	20	0.63	25	0.64	25	0.76	30
	Adhesive	0.10	4	0.13	5	0.13	5	0.13	5	0.38	15	0.51	20
Tensile:		29 lbs/in		39 lbs/in		39 lbs/in		53 lbs/in		66 lbs/in		78 lbs/in
Length:		60 Meter		50 Meter		40 Meter		30 Meter		25 Meter		20 Meter
Width:		2, 3, 4, 6, 9,12
Colour:		Black, White, Red, Blue, Purple, etc.
Elongation:		300%
Adhesion to Inner Layer T-100 (ASTM D 1000)		46 oz/in, 5N/10mm
Cathodic Disbandment: (ASTM G8)		0.25 in radius 6.4 mm
Water Vapor Transmission Rate: (ASTM F1249)		0.2g/100in2 /24h, 0.3mg/cm2/24h
Water Absorption: (ASTM D570)		≤ 0.1
Volume Resistively: (ASTM E257)		2.5 X 1012 ohm·cm
Dielectric Strength: (ASTM D 149)		40 KV
Temperature Range: (Normal in Ground Service)		-30 to 160 oF, -34 to 71oC