Professional Formula Ceramic Floor Tile Adhesive Waterproof For Swimming Pool

Professional Formula Ceramic Floor Tile Adhesive Waterproof For Swimming Pool

 

 

Product Name	PB-02 Retread Tile Adhesive(C2)
Appearance	White, gray power
Feature	Strong bonding power, good flexibility, material-saving,good anti-infiltration and anti-aging function, non-toxic, prevent fire,no-radiation, no smell and environmental
Surface Preparation	Firm, smooth, dry and clean, no grease, no wax, and other loose materials
Application	Applied to indoor and outdoor wall paste of large-sized ceramic tile, grassing stone and natural stone material
Cool Time	about 10min
Adjust Time	about 15min
Dry Time	About 24h (according to the weather)
Cut Degree	＞1.2MPa (14days later)
Construction Temperature	5℃~40℃

 

PB-02 Tile Glue is a high performance, professional formula adhesive with the high bond strengths required for all kinds of tiles and stones installations. Suited for ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile. PB-02 provides maximum resistance to intermittent water exposure.

 

 

Product Description

 

Product features:

1. Has strong cohesion force. Reduce the common phenomenon of tiles detaching and peeling when pasted by Portland cement.

2. Be premixed and produced, the product is stable, water and used, to protect the construction environment.

3. Has strong water retention, no need to DIP tiles and wet walls, thin construction, easy operation, to reduce material consumption and building load.

4. Has good flexibility to resist effectively the destruction of various stresses.

5. Has special formula to avoid completely the common phenomenon of tiles cracking, detaching and peeling by Portland cement.

6. It is no-toxic, no-radiation, no smell and environmental.

7. Has special formula to prevent the flow with too much southbound crash, easier construction.

 

Treatment of base plane:

1. Base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.

2. Check base plane roughness by 2m guiding rule, error should be less than 5mm.

3. New plastering cement mortar could be constructed after 14 days maintenances.
 

 

Operation Process:

 

1, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1㎡.

 

2, Push the ceramic tile or heavy type ceramic tile above it.

 

3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material.

 

4, Can be use for the old ceramic tile re-tread.

 

Attentions:

1. The vertical and smoothness of the substrate must be confirmed before construction.

2. The product is suitable for construction in the 5℃~40℃.

3. Don't use the dried paste by reading water.

4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.
 

 

Store Method:

 

Store in cool and dry place, unopened product can be saved for one year.

 

 

Packing:      

 

20kg/bag.

 

Technical parameters:

 

Coverage area(amount)	Technical reference
1, using 3×3mm tooth scraper about 1.7kg/㎡	1, adjust time: about 15min (adjust time: the effective time for the dislocation to adjust)
2,using 6×6mm tooth scraper about 3.0kg/㎡	2, cool time: about 10min (cool time: the longest cool time that the adhesive can last )
3, using 10×10mm tooth scraper about 4.5kg/㎡	3, dry time: 24h (according to the weather)
	4, water resistance: excellent; non-toxic, prevent fire
the smoother the surface, the less amount.	5, when dry, anti-weak acid, anti-strong alkali and oil resistance
	6, cut degree: ＞1.2MPa (14days later)