PP Rope (hot knife Cutter)

  Hot Knife Electric Rope Cutter/Fabric Cutter   KD-8-3 Youtube Video:   https://youtu.be/UJtRMBQ-Fp0    

1.Hot Knife Electric Rope Cutter Quantity

  Special making heating cutter since 2006, Exported to world wide market. All of cutters are CE certified.         

2.Hot Knife Electric Rope Cutter Applications

    Electric rope cutter cut the rope with diameter 1 inch, and the webbing, with fine cutting edge, no disperse. Attached with the cutting foot, the hot knife cut the synthetic fiber cloth without backup under the cloth, seal the cutting edge as well; cut the seal line on the bag. Especially good for cutting sail cloth, awnings and filter cloth.  

3.Hot Knife Electric Rope Cutter Preparations

  Select a hot knife blade corresponding to the cutting use. Loosen the knurled nut when device is cold. Insert each leg of the blade and tighten the knurled nuts. Make sure that the blade and the cutting head have optimal contact. If both legs of the blade are not properly installed, the unit will not heat up.    

4.Hot Knife Electric Rope Cutter Cutting

  Actuate switch, the indicator light and the blade will heat up. Avoid direct short circuit between cutting heads. Do not use metallic rulers for guiding the blade. Clean cutting heads with enclosed wire brush. Please make sure the blade is connected to the cutting material before blade heats up.  

5.Hot Knife Electric Rope Cutter Cautions

  Always operate the Hot Knife in well ventilated space. Never burn off the excess residue on the Hot Knife blade. The blades will over heated and be warped. Only operate Hot Knife when it is in contact with the insulation board Keep hot blades away from skin, clothing and other flammable materials. Allow blades to cool before handling. Hot Knife may cause injury or burns to exposed surfaces. If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the Hot Knife will operate again.  

6.Hot Knife Electric Rope Cutter Details

   Specification:  

Voltage	AC230V/50Hz (110V/60Hz)
Weight	950 g
Size	21/5/4.6 cm
Power	MAX.60W
Intermittent operation	1/4 min
Power cord length	2.5m

    Practicable blades:  

Blade and model number	Application
R blade No.10.2	Standard blade
Cutting foot No.21	Fitted with the R blade, cutting synthetic frabic without using a cutting surface.

   

7.Hot Knife Electric Rope Cutter Pictures

     

8.About CANTY

   Changzhou Canty Electric Industry Co.,Ltd As the earliest special manufacturer of heating cutter in China. Canty Electric Industry has been committed to the research and development of the products for 15 years.

Our products has been used in cutting EPS and XPS Foam, Synthetic Fiber rope, fabric, belting, etc. Originally we mainly produce AC tools and equipments. In 2013 we developed the first Cordless foam cutter with Li-ion battery in the world. In 2015 we developed the highest function CNC Foam Cutting machine (with Turn table, Lathe). We also produced Mineral Wool Board Cutting Machine for building area.

With Canty you get Service, Quality and Innovation Heating cutter back by 15 years’ experience.  

Certificates

   

Workshop

   

Packaging & Warehouse