polyacrylamide/flocculant as drilling mud chemical/mining and coal/paper making

1.oil field chemical
2.Well drilling mud raw materials
3.polyacrylamide for EOR
4.Industrial Waste Water
5. Free sample

technical data:

1,Appearance ;White granule

2,Molecular weight ;(4-20)million

3,Granule;20-100mesh

4,Solid content ;88%minimum

5.Hydrolyzing degree;10-20%.20-30%or 30-40%

6,Dissolving time ;2 hours maximum

7,Insoluble;0.5% maximum

8,Monomer free;0.05%maximum

Polyacrylamide brief :

called PAM .commonly known as flocculant or cohesion agent ,sub-cation,aniontype,the molecular weight between 4-20 million, the product appearance is white or slightly yellow powder,soluble in water ,

In particular ,acid and organic matter and the red mud suspension turbidity from flocculation

sedimentation and separation of the role of liquid mud,use less,water and low cost ,flooulant

can not be replaced by other products

Usage method :

Using morphology is 0.10.1% aqueous solution,the water is PH should in 7.PAM can be used for water treatment only ,

but also canbe used in conjunction with PAC ,but the two must be separated when mixing the

two and you can increase of dosage according to respective situation.Storage ,Transportation ,caution

This product is nontoxic in normal use conditions,no stimulation of the skin ,stored in the ventilation and

dry place ,to prevent moisture

Area application :

1. Oil field exploration and development

2. Industry waste water purification, urban sewage purification

3. Paper-making industry for the clarification of liquid caustic soda

4. Textile, carpet industry

5. Sugar syrup for the industry to clarify the agent

6. Oil field water treatment to deal with the recovery of oil

Notes Caution :

1,the operator should wear protective equipment ,skin contact ,or water wash

2,using the on site ,usually rinsed with water to prevent slipping injuries

3,This series should seal kept in a cool dry place