Plate And Frame Filter Press For Oil Fractionation

The Filter Press is composed of alternating filter plates and filter frames to form a set of filter chambers. The surface of the filter plate has a groove structure, and the convex portion is used for supporting the filter cloth. The filter frame and the filter plate have through holes at the corners thereof, and after assembly, a complete passage can be formed, which can pass into the washing water and suspend. The liquid and the filtrate are taken out. On both sides of the plate and the frame, there are handles supported on the upper surface of the beam, and the plate and the frame are pressed by the pressing device. The filter cloth between the plates and the frames functions as a gasket. The suspension hydraulic pressure is introduced into the filter chamber by the feed pump, and the filter residue is formed on the filter cloth until it is filled with the filter chamber.

Chamber Filter Plate Product application
The plate frame sludge filter press produced is a pressure-operated pressure filtration device suitable for solid-liquid separation of various suspensions; good separation effect, structure Simple, easy to operate, safe and reliable, widely used in petroleum, chemical, ceramics, dyes, pharmaceuticals, sugar, food, metallurgy, textile, coal and environmental protection industries.

Plate And Frame Filter Press Product feature
The filtrate passes through the filter cloth and flows along the groove of the filter plate to the corner channel of the plate frame to be discharged. After the filtration is completed, the filter residue can be washed with water. After washing, compressed air is passed through to remove the remaining washing liquid. Then open the filter press to remove the filter residue, clean the filter cloth, re-press the plate, frame, and start the next work cycle.

The Filter Press For Sludge Dewatering is mainly composed of compression plate (active filter plate), thrust plate (fixed filter plate), filter medium (filter cloth or filter paper, etc.), filter plate and filter frame, beam (flat iron frame), pressing The composition of the device, the sump and the like (see the drawing), wherein the filter medium and the sump are provided by the user, and of course, can also be replaced by our company.

The manual pressing is the screw jack pushing the pressing plate to press; the mechanical pressing is the motor with the H-type reduction box, and the pressing plate is pressed by the frame transmission component; the hydraulic pressing is the hydraulic cylinder of the hydraulic station through the frame. The component pushes the pressing plate to be compacted; the control system of the automatic filter press adopts PLC programming control, and the degree of automation is high.

Mining Equipment Filter Press Technical data