plastic heavy oil flow meter Rotameter

Specifications plastic heavy oil flow meter Rotameter

heavy oil flow meter

Good chemical resistance

plastic heavy oil flow meter Rotameter

Short Tube Type
Technical Parameters
Model	Flow rate (water 20°C)	Size (mm)		Socket end	BSP Thread	Flange	Condition
		L	D1
LZB-15S (with guide rod)	5-50L/h	200	20	Φ20	G1/2”	DN15	Pressure: <=1(MPa)     Accuracy: ±4%   Temp (°C): 0-60 (Water)
	6-60L/h
	10-100L/h
	16-160L/h
	25-250L/h
	40-400L/h
	60-600L/h
LZB-25S (with guide rod)	100-1000L/h	226	32	Φ32	G3/4”	DN25
	160-1600L/h
	250-2500L/h
	300-3000L/h
LZB-32S (with guide rod)	400-4000L/h	288	40	Φ40	G1”	DN32
	600-6000L/h
LZB-50S (with guide rod)	0.4-4m3/h	341	63	Φ63	G1-1/2”	DN50
	0.6-6m3/h
	1-10m3/h
	1.6-16m3/h
LZB-65S (with guide rod)	5-25m3/h	430	75	Φ75	G2”	DN65
	8-40m3/h
	10-50m3/h
	12-60m3/h
LZB-80S (with guide rod) (Flange)	5-25m3/h	533			None	DN80
	8-40m3/h
	10-50m3/h
	12-60m3/h
LZB-100S LZB-125S LZB-150S (with guide rod)	8-50m3/h	555			None	DN100 DN125 DN150
	10-60m3/h
	14-90m3/h
	18-120m3/h
	18-150m3/h
	20-180m3/h
	20-200m3/h
	20-220m3/h

(1)Before installation, take out foam supports in the tube carefully. Make sure therubber ring is installed correctly on the indentation.   (2)This Flowmeter can be equipped with ABS pipe or PVC pipe by using special glue to connect. It also has flange connection or thread connection.   (3)This flowmeter should be installed vertically and be convenient to read the scale. When reading, keep the sight and the float horizontal.(General standard: the best flow to be measured should be 50%~70% of max flowrate. Try not use the maximum value.)   (4)The straight lengths of both inlet and outlet pipes connected with the flowmeter should be more than five times of the flowmeter’s length.   (5)The pressure of liquid should be stable. If the pressure of liquid is not stable, it will lead the wave of floater and cannotmeasure correctly, and a buffer or setting adjuster should be set above the flowmeter.     The flowmeter can be installed in any position without affecting the accuracy, which can be installed in horizontal or vertical piping, even upside down. Z-60, Z-65 can be equipped with upper and lower limit alarm switch. Tips: 1.This Product can wrap with PTFE for acid water. 2.This Product can deploy with flange.