Product description
Specifications:
- Standard: EN 545 to 2002, K9
- Effective length: 6m when using bulk shipment way, or about 5.5 or 5.7m when in 20ft container shipment way
- Zinc coating: at least 130gsm
- Bitumen painting: at least 70Φm
- Gaskets are NBR rubber, natural rubber, SBR rubber or EPDM rubber
- Tightness ring: DN 80 to 1200mm
- High strength, lighter than gray iron, nice corrosion resistance, no furring, small flow resistance, easy fixing and long life time
- Checked by automatic inspection equipment
Composition:
- C: 3.4 to 3.7%
- Si: 2.0 to 2.4%
- P: <0.08%
- S: <0.015%
- Pull strength: >420MPa
- Yield: >10%
- Hardness: >230HB
Process and testing:
- Blast furnace (analysis of raw materials test)
- Mg treatment (micro and chemical composition test)
- Pipe spinning (temperature test)
- Heat treatment (micro structure/flattening test)
- Zinc coating (thickness testing)
- Dimensional checks (thickness and Ø testing)
- Hydraulic test (pressure test)
- Internal lining (thickness testing)
- External coating (thickness test)
Packing: in bulk or container
Standard: EN 545 to 2002, K9
Effective length: 6m when using bulk shipment way, or about 5.5 or 5.7m when in 20ft container shipment way
Zinc coating: at least 130gsm
Bitumen painting: at least 70Φm
Gaskets are NBR rubber, natural rubber, SBR rubber or EPDM rubber
Tightness ring: DN 80 to 1200mm
High strength, lighter than gray iron, nice corrosion resistance, no furring, small flow resistance, easy fixing and long life time
Checked by automatic inspection equipment
C: 3.4 to 3.7%
Si: 2.0 to 2.4%
P: <0.08%
S: <0.015%
Pull strength: >420MPa
Yield: >10%
Hardness: >230HB
Blast furnace (analysis of raw materials test)
Mg treatment (micro and chemical composition test)
Pipe spinning (temperature test)
Heat treatment (micro structure/flattening test)
Zinc coating (thickness testing)
Dimensional checks (thickness and Ø testing)
Hydraulic test (pressure test)
Internal lining (thickness testing)
External coating (thickness test)