Permanent Neodymium Magnetic Hooks Rare Earth Mounting Magnets 

Product Name: Permanent Neodymium Magnetic Hooks Rare Earth Mounting Magnets.
Material: Permanent Rare Earth Neodymium Magnet.
Magnetization Direction: Axial magnetized (Poles on Flat Ends).
Surface Plating: Ni-Cu-Ni (Nickel)  which is a 3 - layer protective coating - Nickel + Copper + Nickel (Ni-Cu-Ni), so the magnetic hooks are with very good corrosion resistence.
Magnet Grade: N35, other grades can also supplied.
BHmax: 33 - 36 MGOe
Max. Tem (degree ℃): 80°

Grade	ResidualInduction	Coercive Force	Intrinsic Coercive Force	Maximum Energy Product	Maximum Working Temperature
	Br	Hcb	Hcj	(BH)max	Tw
	mT	kA/m	kA/m	kJ/m3
	[kGs]	[kOe]	[kOe]	[MGOe]
N35	1170-1220	≥868	≥955	263-287	80°
	[11.7-12.2]	[≥10.9]	[≥12]	[33-36]
N38	1220-1250	≥899	≥955	287-310	80°
	[12.2-12.5]	[≥11.3]	[≥12]	[36-39]
N40	1250-1280	≥907	≥955	302-326	80°
	[12.5-12.8]	[≥11.4]	[≥12]	[38-41]
N42	1280-1320	≥915	≥955	318-342	80°
	[12.8-13.2]	[≥11.5]	[≥12]	[40-43]
N45	1320-1380	≥923	≥955	342-366	80°
	[13.2-13.8]	[≥11.6]	[≥12]	[43-46]
N48	1380-1420	≥923	≥955	366-390	80°
	[13.8-14.2]	[≥11.6]	[≥12]	[46-49]
N50	1400-1450	≥796	≥876	382-406	80°
	[14.0-14.5]	[≥10.0]	[≥11]	[48-51]
N52	1430-1480	≥796	≥876	398-422	80°
	[14.3-14.8]	[≥10.0]	[≥11]	[50-53]
30M	1080-1130	≥805	≥1114	223-247	100°
	[10.8-11.3]	[≥10.1]	[≥14]	[28-31]
33M	1130-1170	≥836	≥1114	247-263	100°
	[11.3-11.7]	[≥10.5]	[≥14]	[31-33]
35M	1170-1220	≥868	≥1114	263-287	100°
	[11.7-12.2]	[≥10.9]	[≥14]	[33-36]
38M	1220-1250	≥899	≥1114	287-310	100°
	[12.2-12.5]	[≥11.3]	[≥14]	[36-39]
40M	1250-1280	≥923	≥1114	302-326	100°
	[12.5-12.8]	[≥11.6]	[≥14]	[38-41]
42M	1280-1320	≥955	≥1114	318-342	100°
	[12.8-13.2]	[≥12.0]	[≥14]	[40-43]
45M	1320-1380	≥995	≥1114	342-366	100°
	[13.2-13.8]	[≥12.5]	[≥14]	[43-46]
48M	1370-1430	≥1027	≥1114	366-390	100°
	[13.7-14.3]	[≥12.9]	[≥14]	[46-49]
50M	1400-1450	≥1033	≥1114	382-406	100°
	[14.0-14.5]	[≥13.0]	[≥14]	[48-51]
35H	1170-1220	≥868	≥1353	263-287	120°
	[11.7-12.2]	[≥10.9]	[≥17]	[33-36]
38H	1220-1250	≥899	≥1353	287-310	120°
	[12.2-12.5]	[≥11.3]	[≥17]	[36-39]
40H	1250-1280	≥923	≥1353	302-326	120°
	[12.5-12.8]	[≥11.6]	[≥17]	[38-41]
42H	1280-1320	≥955	≥1353	318-342	120°
	[12.8-13.2]	[≥12.0]	[≥17]	[40-43]
45H	1320-1360	≥963	≥1353	342-366	120°
	[13.2-13.6]	[≥12.1]	[≥17]	[43-46]
48H	1370-1430	≥995	≥1353	366-390	120°
	[13.7-14.3]	[≥12.5]	[≥17]	[46-49]
35SH	1170-1220	≥876	≥1592	263-287	150°
	[11.7-12.2]	[≥11.0]	[≥20]	[33-36]
38SH	1220-1250	≥907	≥1592	287-310	150°
	[12.2-12.5]	[≥11.4]	[≥20]	[36-39]
40SH	1250-1280	≥939	≥1592	302-326	150°
	[12.5-12.8]	[≥11.8]	[≥20]	[38-41]
42SH	1280-1320	≥987	≥1592	318-342	150°
	[12.8-13.2]	[≥12.4]	[≥20]	[40-43]
45SH	1320-1380	≥1003	≥1592	342-366	150°
	[13.2-13.8]	[≥12.6]	[≥20]	[43-46]
28UH	1040-1080	≥764	≥1990	207-231	180°
	[10.4-10.8]	[≥9.6]	[≥25]	[26-29]
30UH	1080-1130	≥812	≥1990	223-247	180°
	[10.8-11.3]	[≥10.2]	[≥25]	[28-31]
33UH	1130-1170	≥852	≥1990	247-271	180°
	[11.3-11.7]	[≥10.7]	[≥25]	[31-34]
35UH	1170-1220	≥860	≥1990	263-287	180°
	[11.7-12.2]	[≥10.8]	[≥25]	[33-36]
38UH	1220-1250	≥876	≥1990	287-310	180°
	[12.2-12.5]	[≥11.0]	[≥25]	[36-39]
40UH	1250-1280	≥899	≥1990	302-326	180°
	[12.5-12.8]	[≥11.3]	[≥25]	[38-41]
28EH	1040-1080	≥780	≥2388	207-231	200°
	[10.4-10.8]	[≥9.8]	[≥30]	[26-29]
30EH	1080-1130	≥812	≥2388	223-247	200°
	[10.8-11.3]	[≥10.2]	[≥30]	[28-31]
33EH	1130-1170	≥876	≥2388	247-271	200°
	[11.3-11.7]	[≥10.5]	[≥30]	[31-34]
35EH	1170-1220	≥876	≥2388	263-287	200°
	[11.7-12.2]	[≥11.0]	[≥30]	[33-36]
38EH	1220-1250	≥899	≥2388	287-310	200°
	[12.2-12.5]	[≥11.3]	[≥30]	[36-39]
28AH	1040-1080	≥787	≥2624	207-231	220°
	[10.4-10.8]	[≥9.9]	[≥33]	[26-29]
30AH	1080-1130	≥819	≥2624	223-247	220°
	[10.8-11.3]	[≥10.3]	[≥33]	[28-31]
33AH	1130-1170	≥843	≥2624	247-271	220°
	[11.3-11.7]	[≥10.6]	[≥33]	[31-34]

Type 1: 16mm Diameter Permanent Neodymium Magnetic Hook.

Magnetic Face: 16mm Diameter.
Thickness: 13mm.
Total Height: 33mm.
Vertical Magnetic Pull Force: 5 kgs. A single D16mm magnetic hook can support a steel weight of up to 5kgs vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet.





These magnets are 16mm dia x 33mm from the magnetic face of the magnet to the top of the hook. The Pot magnet base is 13mm tall from the magnetic face of the magnet to the top of it's threaded collar. The magnetic collar is 4.0mm dia andhas a M4 thread. The threaded hook is 20mm from the base tip of the thread to the top of its curve.

Type 2: 20mm Diameter Permanent Neodymium Magnetic Hook.
Magnetic Face: 20mm Diameter.
Thickness: 13mm.
Total Height: 36mm.Vertical Magnetic Pull Force: 10.5 kgs. A single set D20mm magnetic hook is able to support a steel weight of up to 10.5 kgs vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet.





These magnets are 20mm dia x 36mm from the magnetic face of the magnet to the top of the hook. The Pot magnet base is 36mm tall from the magnetic face of the magnet to the top of it's threaded collar. The magnetic collar is with a M4 thread. The threaded hook is 23mm from the base tip of the thread to the top ofits curve.

Type 3: 25mm Diameter Permanent Neodymium Magnetic Hook.

Magnetic Face: 25mm Diameter.
Thickness: 14mm.
Total Height: 42mm.
Vertical Magnetic Pull Force: 22 kgs. A single set D25mm magnetic hook is able to support a steel weight of up to 22 kgs vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet.





These magnets are 25mm diameter x 42mm from the magnetic face of the magnet to the top of the hook. The Pot magnet base is 42mm tall from the magnetic face of the magnet to the top of it's threaded collar.The magnetic collar is with a M5 thread. The threaded hook is 28mm from the base tip of the thread to the top of its curve.

Type 4: 32mm Diameter Permanent Neodymium Magnetic Hook.

Magnetic Face: 32mm Diameter.
Thickness: 18mm.
Total Height: 48mm.
Vertical Magnetic Pull Force: 35 kgs. A single set D32mm magnetic hook is able to support a steel weight of up to 35kgs vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet.




These magnets are 32mm dia x 48mm from the magnetic face of the magnet to the top of the hook. The Pot magnet base is 48mm tall from the magnetic face of the magnet to the top of it's threaded collar. The magnetic collar is with a M6 thread. The threaded hook is 30mm from the base tip of the thread to the top of its curve.

Type 5: 36mm Diameter Permanent Neodymium Magnetic Hook.
Magnetic Face: 36mm Diameter.
Thickness: 18mm.
Total Height: 48mm.
Vertical Magnetic Pull Force: 50kgs. A single set D36mm magnetic hook is able to support a steel weight of up to 50 kgs vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet.





These magnets are 36mm dia x 48mm from the magnetic face of the magnet to the top of the hook. The Pot magnet base is 48mm tall from the magnetic face of the magnet to the top of it's threaded collar. The magnetic collar is with a M6 thread. The threaded hook is 30mm from the base tip of the thread to the top of its curve.

Type 6: 42mm Diameter Permanent Neodymium Magnetic Hook.

Magnetic Face: 42mm Diameter.
Thickness: 15mm.
Total Height: 46mm.Vertical Magnetic Pull Force: 55kgs. A single set D42mm magnetic hook is able to support a steel weight of up to 55 kgs vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet.




These magnets are 42mm dia x 46mm from the magnetic face of the magnet to the top of the hook. The Pot magnet base is 46mm tall from the magnetic face of the magnet to the top of it's threaded collar. The magnetic collar is with a M6 thread. The threaded hook is 31mm from the base tip of the thread to the top of its curve.

Type 7: 48mm Diameter Permanent Neodymium Magnetic Hook.

Type 8: 60mm Diameter Permanent Neodymium Magnetic Hook.

Vertical Magnetic Pull Force: 110kgs. A single set D68mm magnetic hook is able to support a steel weight of up to 110kgs vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness to the magnet.



These magnets are 60mm dia x 83mm from the magnetic face of the magnet to the top of the hook. The Pot magnet base is 24mm tall from the magnetic face of the magnet to the top of it's threaded collar. The magnetic collar is 8.0mm dia and has a M8 thread. The internal diameter of the hook is 8mm and the moved hook is 59mm from the base tip of the thread to the top of itscurve.

These are an incredibly powerful magnet with a hook attached, it can be used as a Clamping Magnet, the wide usage of these magnetic hooks are everywhere!