Peek medical device parts

PEEK screw, whose Chinese name is polyether ether ketone screw, is made of British Wiggs PEEK raw material extruded. PEEK screw not only has better heat resistance than other high-temperature resistant plastics, but also has high strength, high modulus, high fracture toughness, and excellent dimensional stability.

 

I. Characteristics and advantages of PEEK screw:

 

1, can use injection molding process one-time molding, low processing cost.

 

2, more corrosion resistant than metal screws, the price is lower than corrosion-resistant titanium, never rust.

 

3, lightweight.

 

4, high-temperature resistance.

 

5, excellent electrical performance.

 

6, irradiation resistance.

 

Ii. PEEK Screw has outstanding characteristics and advantages in the industrial machinery field:

 

1, chemical resistance (corrosion resistance), biological compatibility, and other characteristics, in common chemicals, PEEK can replace stainless steel used in the conventional liquid analysis systems.

 

2, high purity, with almost no trace elements, will not cause pollution and affect the analysis results.

 

3. High strength, PEEK has both rigidity and toughness, with mechanical strength, compression resistance, impact resistance, and fatigue resistance in plastics.

 

4, high-temperature resistance, long-term use temperature of 260, short-time use temperature up to 300, very suitable for a high-temperature environment.

 

5, wear resistance, PEEK and its composite materials have the characteristics of self-lubrication and wear resistance in plastics.

 

6, hydrolysis resistance, low hygroscopicity, can work in water and steam for a long time.

 

7, low friction coefficient, small operating resistance, and will not occur between metal and metal bite phenomenon.

 

8, compared with metal, the use of energy consumption is significantly reduced, wear resistance is more than two times of copper alloy.

 

9, with self-lubrication characteristics, in some working conditions can not be used without oil, to avoid the pollution of the instrument, the equipment is more clean and beautiful. Injection mold can be used for rapid injection molding of large quantities of complex special-shaped parts, and the processing cost is low.

Product Descriptions:

Item:	peek plastic moulding injection gears
Color:	Nature, black.
Material:	PEEK, PEEK CA30, PEEK CF30
Size:	OEM is welcome.
Weigth:	0.5~500g
Process:	CNC machining or molding injection

Characteristics:

* Strong and stiff plastic

* Outstanding chemical resistance

* Good mechanical properties at elevated temperatures

* Resistant to hot water and steam

* Bearing grade PEEK has excellent wear characteristics

* UL 94 V-0 flammability rating

* Very low smoke and toxic gas emissions when exposed to flame

Typical Applications:

* Semiconductor machinery components

* Pump and valve seals, components

* Electrical components, Insulation parts

* The surgical and dental equipments that required repeat using and sterilization, and body parts

* Food processing machinery components.

Advantages of PEEK:

 

1. Lower fuel consumption and environmental impact with lighter solutions;

 

2. Improve component life through elastic performance in a wide temperature range;

 

3. Enhanced durability and excellent wear resistance of components;

 

4. Reduce downtime and component failures to resist harsh chemicals and natural elements;

 

5. Relying on long-term mechanical properties and dimensional stability;

 

6. Meet strict safety requirements, with low fire, smoke, and toxic emissions;

 

7. Greater component integrity due to excellent barrier performance on fluids and gases.

FAQ

Q1:Will we Wo sign Non-Disclosure Agreements(NDA) ?

A:Yes.If it gives you peace-of-mind to sign an NDA,we are more than w ling to do so.But we have the rightkeep your design in confidential no matter NDA is signed or not.All factories are camera monitored.

Q2:How do I get a quote?

A:Please kindly provide us 3D or CAD solid model in Step, IGS,X_T format, normally Two-dimensional(2D)drawings are not adequate for accurate quoting or parts making B.Please tell us your requirement on quantisurface treatment.Color material,application enviranment for accurate pricing.

Q3:How quickly can l get my parts?

A:Quality parts can be made in 3-5 days if you provide us with complete 2Dand3DCAD models.Morecomplex parts requiring or other special features will take longer.As for shipping,most of our shipments arevia DHL, UPS,Fedex,which can take a few days from China to Europe or NorthAmerica.

Q4;How you do the quality control?

A: a.Materials inspection by IQC.

b.The fist sample inspected by QC,QC wild o over check as per the parameters list and critical dimensic requested by customers, to decide if it can go ahead for production.

c.During processing# our IP QC will check the injection molded parts every 2 hours,ensure no any rejects.

d.FQC will check the products before sending to the warehouse.

e.100% inspected by O QC before shipping out.