PE Hot Shrinkable Pipe Coating Wrapping Tape

Description

The appearance of the filler should be checked one by one, and the surface of the heat-shrinkable zone or

winding zone should be smooth and smooth without wrinkles or bubbles. The corners of both ends of the

slope are closely bonded to the heat-shrinkable sleeve. No gap. There is no carbonization on the surface.

PE Hot Shrinkable Tape flows out uniformly around the hot melt adhesive. The spark leak detector was

used to check the pinhole one by one at the patch. Leak detection voltage 15Kv.

High mechanical strength, anti - aging ability.

Good resistance to environmental stress.
Excellent adhesion performance.
Easy to use.
Larger operating temperature: 80 ℃
Suitable for coating :PE, FBE, PP
Steel pipe preheating temperature: 75 ℃
Recommended rust removal grade :Sa 2.5
Product specification: the product can be used for dn100-dn1000 all steel pipes
The thickness of the substrate is from 1.0mm to 2.0mm, and the thickness of the rubber layer is from

0.8mm to 2.0mm

Other Product Recommend

Polyken955 Outer Tape,Inner Wrap Tape,Polyken 940 Aluminum Butyl Tape,Inner Anti-corrosion Tape,

Gas Pipe Tape.