Product Name: Outdoor Polyester Powder Coating/Powder Paint for garden tools
Polyester Powder Coating dates back from the 1970’s and is the method of coating aluminium windows and doors. Polyester Powder Coating is the standardised method of painting aluminium windows and doors today, but powder coating is also applied to many other metal goods such as the motor industry and domestic white goods.
A lot of people assume painted aluminium windows to be “spray painted” whereas in fact powder coating is the application of dry paint to an aluminium window or door profile in the form of a fine powder which has been electrically charged.
Powder coating differs from ‘wet paints’ which typically are solvent based paints that must fully dry and evaporate.The aluminium window profile is electrically earthed so the polyester powder bonds to the profile and coats it through simple static electricity. Following this application with electrical charge the profiles are oven baked at a high enough temperature to melt the powder allowing the paint finish to cure before it is cooled. This results in powder coated aluminium windows. Advantages:
--Good adhesive force, excellent mechanical performance, tough coating film, which can meet high strength requirement.
---Smooth and flat coating film
---Good outdoor durability
---Excellent function of excessive baking resistance Usage: It is suitable for each decoration and protection of outdoor product such as outdoor lamp, beach chair, solar water heater, outdoor unit of air conditioner, Aluminum Profiles curtain wall, frame for fittings, ceiling, highway barrier, grating, sports facility and communication equipment etc.
Application parameter:
Curing condition: 200°C×10—15 mins/ (Actual temperature of working piece)
Spraying mode: High voltage electrostatic spraying 50-70 KV
Suggested film thickness: 50-70um
Testing Conditions:
Propeties | Tests | Test Method | Test Result |
Physical | Flexibility | BS3900-E11 | 3mm max. |
Cross Cut Test | BS3900-E6 (1mm width) | 0 class |
Cupping Test | BS3900-E4 | 7mm Good |
Pencil Hardness | ASTM D3363 | >= 1H |
Impact Test | ASTM D2794 | >= 50 cm·kg |
Chemical | Salt Spray Test | ASTM B117 (250h) | 2mm max. |
Determination of resistance to Humidity | BS3900-F2 (1000h) | No blistering or loss of gloss |
Soaked in distilled water Test | BS3900-F7 (240h) | No blistering or loss of gloss |
Anti-chemicals | (tested by normal acid,alkali,oil, solvents under room tempeture.) | Good |
Outdoor Duration | 12 months Florida exposure | A slight loss of gloss, but no chalking, remains superior protection. |
Note of Pretreatment: All the steel substrate should be degreased, the ferrous metals should be zinc
or iron phosphating, aluminum recommended chromating, to improve corrosion resistance. Coating Method: Powder can be coated by manual or auto electrostatic spray guns. (or a tribostatic process as for option). it can be cycle used with a proper recycle system. Our services: The most common polymers used are polyester, polyurethane, polyester-epoxy (known as hybrid), straight epoxy (fusion bonded epoxy) and acrylics and so on. For full specification and technical data sheet, please contact with me. Curing conditions: 200°C*10min/180°C*15min/160°C*20min Gloss level: High gloss (above 85%),
Flat gloss (50%-85%),
Semi gloss (10%-50%)
Matt (below 10 %)
Ultra high gloss properties: 330% Surface appearance: metallic (Gold, silver) effect, chrome (Red, Blue, Green, Purple…) effect, smooth effect, art textures (sandy, wrinkle) effect and so on. According to RAL & PANTONE, We accept customized.
Health & Safety: 1.No hazardous ingredient. 2.No hazardous gas. 3.The inhalation of dusts should be avoided. An operator should wear an anti-dust mask and try best to avoid long time contact with the powder coatings. 4.The coatings stacked on the skin could be washed with soap. 5.Requirement of environment protection: the product doesn’t include arsenic, selenium, lead, hexavalent chromium, mercury, stibium, cadmium and other heavy non-ferrous metals and is in fully conformity with requirement of RoHS environment protection. Plant & Package: 1.Carton lined with PE bag 2.Net weight 20kg per carton 3.Carton size:37cm*28cm*33cm 4.A 20ft container could load 15tons Transportation & Storage: a) Below 25°C b) In dry, venting, clean indoor c) Keep away from fire and heating d) With coverage e) If the stored time is more than 6 months, it must be tested before use
FAQ: 1. Q: How much is this product price? A: Product prices are determined by our engineers according to the customer's specific requirements for accounting, so please give us your specific requirements first, like for indoor use or outdoor use, what color, gloss or matte, how about the quantity, if know this we will give the offer to you ASAP. Thank you. 2. Q: Why some manufacturers at a low price? A: 1) Use cheap raw materials, and the quality cannot be guaranteed. 2) Use recycled powder coating, the color is not stable with low utilization rates. 3) Counterfeiting, earned windfall profits, and lead clients lost. 3. Q: What are the conditions for using powder coatings? A: 1) Products with conductive properties. 2) Products at least can anti high temperature of 160 degrees for 20 minutes. 4. Q: Do you charge any sample fee? A: Of course not, we always adhere to the principle of the free trial, if the powder is suit for your product, then we can cooperation. But our free sample must under 5KG and you should pay the courier fee to courier company. 5. Q: What are the advantages your products compared to Jotun, DuPont and AkzoNobel? A: The same quality but more cheaper. Thank you.