Orientek Optical fiber identifier / Fiber optic identifier / Live fiber identifier

Orientek Optical fiber identifier / Fiber optic identifier / Live fiber identifier Description:   The OFI-3 Optical Fiber Identifier is a low cost, portable instrument designed to detect optical  signals  without disrupting traffic. Based on non-destructive macrobending technology, the OFI-3 doesn’t disrupt traffic, damage or overstress the fiber, enabling efficient, accurate and  reliable data acquisition. During maintenance, installations, rerouting or restorations, it’s often necessary to isolate a specific fiber. By simply clamping the OFI-3 onto a fiber, the OFI will indicate if there is a signal, a Modulated Signal, or traffic and show signal direction.   Features:  Detect a variety of optical tones, 270Hz, 1kHz and 2kHz Powered by 2 units of 1.5V AA alkaline batteries RB0.25mm, RB0.9mm, RB3.0mm plungers available Specification:

Recognizable Wavelength Range		900 to 1650nm
Recognizable signal type		CW, 2kHz, 1kHz, 270Hz ±5%
Detector Type		InGaAs 2pcs
Clamp Type		H0.9/0.25 for bare fibers ; H2.5 for jacketed fiber
Sensitivity	@ 1310nm	+11dB to-20 dBm (Continuous Wave) ; +11dB to-10 dBm (Modulated Signal)
	@ 1550nm	+11dB to-30 dBm (Continuous Wave) ; +11dB to-18 dBm (Modulated Signal)
LED Indicator		signal traffic; signal frequency(2kHz/1kHz/270Hz);  signal intensity (5 grades) ; low battery
Operating temperature		-10 to +50(Cels)
Storage temperature		-20 to+70(Cels)
Power Supply		1.5V AA batteries*2pcs
Dimension (mm)		202L*62W*36H
Weight (g)		270

  Contact Us

Shine Zhang
Beijing W&F Technology Co., Ltd.
T: 0086 010 51212818  F: 0086 010  67693310-616 Phone : 86-18612175687
Skype  :  stevenanychat WhatsApp : 18612175687
Products Showroom on Alibaba.com

Hot-Selling   Packaging & Shipping Orders would be shipped within 3 working days upon receiving cleard payments when stock lasts. Delievery time depends on the shipping method, the following is the typical time: Faster courier(Such as EMS, DHL, UPS...) would take 3-7 days;
Air mail(Hong Kong air mail, Singapore air mail) would take 10-20 days.
Package might be delayed occasionally by the Customs or the carrier, we sincerely hope each customer could give a few more days when this happens   After Sale Service After-sales Service(except consumables products): > We guarantee all our electrical and mechanical parts for one year from the delivery date the machine running smooth in customer's place.
> We guarantee that each product is tested carefully and works very well before shipment. We strive for 100% customer satisfaction on every sale we complete.
> We are responsible for the whole lifespan of our products, and whenever you have questions during use, just call us, we are glad to offer technical support timely.

Life-long Maintenance Service:
> During the warranty period, we can repair or replace the defective parts for free.
> After the warranty time, we also repair the defective parts, but only charge part cost FAQ 1..What’s the lead time for all the goods that I required?
---About the 3-4 working days after getting payment.

2.What’s the warranty for your products?
----Normally it is 2 years.

3.What’s your payment term?
---It is 100% T/T in advance

4.What’s the MOQ for your products?
---1pcs is okay. 5. How will you ship to us ? ---- Normally it will takes 3-5 days by DHL or FedEx  6. My fusion splicer machine always has a larger splice loss,what reasons caused it? How solve?
--- 1).the electrodes are aging,you need to change new ones
--- 2).the electrodes are not installed very well,you need to re-install and fix the electrodes well.
--- 3).discharging current is not good,you need to do discharging experiment to make the current get the right point

7.splicing machine shows loss is not large,but it's larger when testing use a OTDR,what causes?how solve?
--- 1).the electrodes are aging,you need to change new ones
--- 2).discharging current is not good,you need to do discharging experiment to make the current get the right point
--- 3).Optical fiber end face is bad,there is something wrong with the cutting blades.You need to adjust the fiber cleaver & cutting blades to make sure end face is better
--- 4).There has dust in V groove,you need to clean V groove,microscope,electrodes etc