Specifications Compressible UV Printing Rubber Blanket
High ink affinity surface rubber
7 models for different machine speed
Thickness: 1.68mm/ 1.95mm
3/4 layers Tips For Use: Before installation, please measure the thickness of blanket to adjust the press accurately.
While installation, please use the constant wrench to tighten it gradually. After installation, please clean the rubber surface before print.
During operation, please use the special solvent to clean the rubber surface for extend the run length.
Other Characteristics:
Model | layer | Speed | Thickness(mm) | Hardness | Tensile Strength | Elongation |
2662 | 3 | <9000 | 1.68/1.97±0.02
| 75-80
| ≥80
| ≤1.2%
|
3663 | 3 | <11000 | 1.68/1.97±0.02 | 75-80 | ≥80 | ≤1.2% |
5665 | 3/4 | ≥12000 | 1.68/1.97±0.02
| 76-82
| ≥85
| ≤1%
|
5885 | 3/4 | ≥12000 | 1.68/1.97±0.02 | 76-82 | ≥85 | ≤0.8% |
777 | 3/4 | ≥12000
| 1.68/1.97±0.02
| 75-80
| ≥80
| ≤1%
|
888 | 3/4 | ≥12000
| 1.68/1.97±0.02
| 75-80
| ≥85
| ≤1%
|
Storage: Keep in a cool and dry place. No sunshine. No wet. Don’t fold the rubber blanket when carry and use. Keep the blankets far away from the hard and sharp-pointed things. Keep them in flat; don’t be in roll, if long time no using. Packaging: A. Cut Size as customized, packaged by carton. B. About 30Meters/Roll, one roll into one big carton.
For further Information, welcome to contact: Name: Rudy Trademanager: shenji1997